Jump to content
SAU Community

Recommended Posts

for n/a r34 GT

200ps(149Kw) @ 6000rpm and 26.0kg-m(255Nm) @ 4000rpm

0-100 in around 8-9seconds, i think HPI quoted high 7's

also, + 0.5 for auto

mind you tho, this is assuming you can drive

GTT's are around the low 6's.

Ok so Im guessing low 8's then? How would it compare performance wise versus a Honda Integra or Prelude?

Im just curious because if I think the non-turbo is too slow then I might get a turbo instead.

Ok so Im guessing low 8's then? How would it compare performance wise versus a Honda Integra or Prelude?

Im just curious because if I think the non-turbo is too slow then I might get a turbo instead.

how slow is too slow?

a r33 gts is slower than a vanquish

a gtr is slower than a top fueler

etc....

as to an integra or prelude i guess it can keep up stock for stock depending on which models... but the integra will pwn in the twisties..

Seriously, if you want a fast car buy a fast car from factory (i.e turbo one) but if your already stuck with a non turbo and want speed but without a turbo the only real option which is illigal... is nitrous. Trust me... a NA with nitrous will shit on a stock GTT. (thats if you run a good shot. i.e 75hp)

Dayne

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
×
×
  • Create New...