Jump to content
SAU Community

Has Any1 Got Insurance On Non Complied Car? How?


Recommended Posts

How did you all drive back from the docks and get RWC etc without insurance?

Im with just cars and they wont transfer into my name until I get the car complianced.

Any help would be appreciated..

Like I can drive the car but can't get insurance for it :P

Greg

haha

nah mate u cant insure a car that isnt registered... insurance is only valid when the cars registered

Yeah you can :P

They will insure the car that's fine but it needs to be complianced.. You can register if you have temp rego.. I have temp rego as of 2 days ago but no insurance..

Greg

i thought that you could get a cover note on the car untill it got insured like for say 28 days

i may be wrong though...

Well they will insure it as long as I have temp rego which I have but they will only insure if the cars been complied. That's why im unsure of how everyone picks their cars up from the docks.

Greg

You call Vic roads and get an "unregistered permit". They will take the current plate of the car and VIN no and print it onto paper before faxing it through. Costs about $60 for 30 days. Can be renewed as often as need be but the car is only supposed to be used to move between places where compliance work is being done.

I did insure mine through RACV but it wouldnt have been covered.

You call Vic roads and get an "unregistered permit". They will take the current plate of the car and VIN no and print it onto paper before faxing it through. Costs about $60 for 30 days. Can be renewed as often as need be but the car is only supposed to be used to move between places where compliance work is being done.

I did insure mine through RACV but it wouldnt have been covered.

Yeah I've already got temp rego (eg. unregistered permit)

But because the car is not complianced yet there is no new Vin.

I'll just have to drive it like that.. ohwell.. Not like insurance are going to cover the car anywayz..

Thanks

Greg

Yeah I've already got temp rego (eg. unregistered permit)

But because the car is not complianced yet there is no new Vin.

I'll just have to drive it like that.. ohwell.. Not like insurance are going to cover the car anywayz..

Thanks

Greg

Yeah, i remember when i had to drive to vic roads in burwood to get registered without insurance. As soon as i got the plates, i called up just cars and they insured me.

Yeah, i remember when i had to drive to vic roads in burwood to get registered without insurance. As soon as i got the plates, i called up just cars and they insured me.

So you actually get the Vin issued by Vic roads and not when you get the car complianced?

Greg

I think he means number plates, I had my car trucked places, because I was too scared to risk driving it without insurance between compliance and what not... a picked a place to get the car roadworthied that was close by so as the chance of having an accident was lower, and yeah, as soon as I regoed the car I got it insured.

Is that standard practice to re issue the VIN in Australia? Assumed it would stay all the way through from birth to death. Or is the VIN on a jap car written in Japanese (excuse my ignorance, havent seen a VIN on a car only sold in Japan)

Is that standard practice to re issue the VIN in Australia? Assumed it would stay all the way through from birth to death. Or is the VIN on a jap car written in Japanese (excuse my ignorance, havent seen a VIN on a car only sold in Japan)

I think when a car gets complianced over here, they add numbers to the start of the VIN to make it match up with the normal Australian VIN numbers...

ie, jap VIN is like ECR33- XXXX , so they add like xxxxxxxECR33-XXXX

etc

the VIN plates that I had when the car came from the japan are the vin plates that I have now and are regoed with.

it came from japan like xxxxxxxxxhcr32xxxxx... under the 15yr rule no compliance plates need to be fitted, only a compliance certificate is required, as well as the original VIN's of course. As far as I know VIN's aren't reissued, at least under 15yr compliance anyway...

The temp rego from vicroads i am sure comes with some type of insurance on it, they couldnt just give you rego and be like "ok, on your way"

Ive had three certificates but never asked.

The car i imported i never insured, but when i bought my stag, i just called up just cars and said "insure me". From the moment i hung up the phone, i was insured, but i had to pay them within 28 days else they wouldnt cover me...ever (i was told id get black listed). However, this car was registered, so not sure if that helps.

PS. Docks to home is like, 25km, it couldnt be that big a risk if you know how to drive?

The temp rego from vicroads i am sure comes with some type of insurance on it, they couldnt just give you rego and be like "ok, on your way"

Ive had three certificates but never asked.

The car i imported i never insured, but when i bought my stag, i just called up just cars and said "insure me". From the moment i hung up the phone, i was insured, but i had to pay them within 28 days else they wouldnt cover me...ever (i was told id get black listed). However, this car was registered, so not sure if that helps.

PS. Docks to home is like, 25km, it couldnt be that big a risk if you know how to drive?

Yeah... I'll have to find out..

Well it's been delayed until tomorrow..

My only worry is it raining tomorrow and me driving a 250 - 300rwkw car on street tyres.. I'll check it out when I get there and see how we go..

Thanks for all the help guys..

Greg

get it delivered on a truck... problem solved. call Jack at Citywide towing, he will get your car to your house without breaking shit and he's an SAU member so he gives other SAU members good rates.

Just don't get right foot happy with a car that you just picked up from the docks. Its usually got shitty fuel, a bad tune and fluids that need to be flushed. Chances of someone driving into you is minimal, and if you drive patiently you should be able to get home in one piece.

Although keep in mind if this is your first "dock experience" be very very patient. Take a portable jumpstart kit or fully charged battery, jumper cables, a jerry can, 10mm and 12mm spanner and a phillips screwdriver. And if its a modified car, you'll most probably foul the plugs if you don't start/idle it properly when you crank it after weeks of non running.

Really?

When was this and had the car been complianced at this stage?

cheers,

Greg

It was complied, but not registered.

They were very reluctant to insure it, but somehow my mum convinced them to do it.

Edited by darK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...