Jump to content
SAU Community

Recommended Posts

Just had a ride in my friend's new MX5..........damn the car feels powerful with good power to weight ratio........

Now I feel my skyline doesn't have enuf power (which it doesn't)........so unsatified with my current power............im gonna be in a slump for a while

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/
Share on other sites

Engine type 2.0 litre in-line 4 cylinder 16 valve DOHC S-VT

Engine capacity cc 1,998

Bore and stroke mm 87.5 x 83.1

Compression ratio 10.8 : 1

Maximum power kW 118 @ 6,700rpm

Maximum torque Nm 188 @ 5,000rpm

Throttle control Electronic (drive-by-wire)

Fuel system Electronic fuel injection

Fuel tank capacity litres 50

Fuel consumption man (combined) 1 l/100km 8.5

auto (combined) 2 l/100km 8.8

Recommended fuel Premium unleaded (min. 95 RON )

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1638076
Share on other sites

Yeah the MX-5's are a great drivers car. Its a shame they can be underrated as a performance car as you'd only rarely see a nicely modded up one as you would pretty much see them in the hands of some toorak or south yarra dude who only bought it because it was a convertible and has kept it stock standard for the past 10 years being blind to further modding.

Comparing it to my R32 GTSt I've driven both the NA and NB series MX-5's they are piss weak but they feel alot more chuckable around corners even though they are relatively underpowered. they'd be a really good slightly most costly alternative to an AE86 if you looking for a light NA rear-wheel drive car.

they aren't as fast in a straight line (but then again I'm not into drags at the traffic lights, no skill in that.) but they are awesome on the twistys. :)

they'd be a good drift weapon if given a good balanced setup.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1638216
Share on other sites

not sure about the specs, but apparents she had the limited edition of the MX5, bilstein suspension...... I think its about 160 hp and 1100kg......AND

7 thats right 7 CUP HOLDERS!!!!!!!!!!!!!!!!! and I could seriously use one in my car.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1639600
Share on other sites

Anyone see the ad in drive for the new mazda 6?? 190kw and 380nm torque at 3000rpm wwttff thats nuts how can they get that amount of torque at such low revs?

Modern turbo cars are getting better and better at producing massive torque at low RPM. The old school of turbos were laggy and needed revs revs revs to make power, while the NAs made the low RPM torque. Now the opposite is true, with high powered NAs needing RPM to make big numbers, and turbo cars making huge torque at very low RPM.

Some of the more rediculous torque figures are from small modern turbo engines:

Holden Astra Turbo: 250Nm @ 1950RPM from 2.0 litre 4 cyl

Volkswagen Golf GTi: 280Nm @ 1800RPM from 2.0 litre 4 cyl

Saab 9-5 Aero: 350Nm @ 1900RPM from 2.3 litre 4cyl

And just to make them all feel weak:

Bentley Continental GT: 650Nm at 1600rpm

Mercedes SL65 AMG: 1000Nm at 2000-4000rpm from 6 litre V12

Bugatti Veyron: 1250Nm at 2200-5500rpm from 8 litre W16

The 4 banger creates max power at 5500 so it probably redlines about 6, so max torque would be around that area.

Power is dependent on both revs AND torque, so peak power does not necessarily appear near peak torque.

why oh why doesn't Mazda put a rotary in one damnit!

This was for sale a few months back:

13B Rotary MX-5

Alternatively check out the Bullet Roadster. Basically an MX-5 with a 13B, 20B,Lexus V8 or supercharged V8. Bit more expensive than the standard MX-5 though! Mazda will never make a rotary MX-5 because it will eat into RX-8 sales, and perhaps the rumoured upcoming RX-7.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1639958
Share on other sites

I have a reasonably modified 1989 NA6CE MX-5 (imported Eunos Roadster actually), as well as a newly complied and registered R32 GTR with HKS GT2530's and supporting mods.

The MX-5 is much fun it's criminal. Different sort of fun tho - and I'd actually take the MX-5 for hills driving.

The GTR is just insanely powerful and efficient, but the MX-5 is supremely fun to drive. I think my next car will be the new MX-5, modified of course :O

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1641115
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...