Jump to content
SAU Community

Recommended Posts

By the sound of it Ben our car's will be hitting the road about the same time, Sweet!

Be good to see your car on the black stuff again Ray, i know its been a while between drives for me :D

Thinking about pulling the 25 head off and fitting a 26.

i know you have probably already decided to go for it but the 26 head would be a far better option. the sound of the 6 throttles is nice to.

could you please PM me a price for the Greddy manifold throttle body and possibly tomei cams? for a friend that is.

thanks damo

Thought I would update:

New Tyres, 30mm spacers on the back :down: Straight as body and new paint!

Will add some progress pics! Ignore the unwashed tyres, need to get some tyre shine onto em. Its getting buffed tomorrow :P

post-54301-1237777429_thumb.jpg

The for sale picture on the car before I got it.

post-54301-1237777439_thumb.jpg

JIC Coilovers, 19" wheels, Tinted windows, Stero system added

post-54301-1237777773_thumb.jpg

Damage that was on the car when I got it

post-54301-1237777781_thumb.jpg

Damage. The front left guard was also buggered and got replaced before the respray

post-54301-1237777448_thumb.jpg

Tinted taillights, damage repaired. Front and rar guards rolled. Rear guards flared a smidge, and also the line that usually sits around the arch taken out. (Still in the front guards)

post-54301-1237777462_thumb.jpg

Car being stripped and preped

post-54301-1237777471_thumb.jpg

Bars and sideskirts painted and in the sun

post-54301-1237777477_thumb.jpg

Car as it sits before buff

post-54301-1237777483_thumb.jpg

Car as it sits before buff

post-54301-1237777491_thumb.jpg

Car as it sits before buff

  • 2 weeks later...

well, after examining the exhaust manifold on the weekend i noticed 2 snapped studs on cyl 6 so decided to take the whole manifold off.. in the end 3 more studs snapped :) so have a total of 5 snapped studs and 7 in ok condition. Will be getting a local guy to drill/ease out the snapped ones and get new studs and gasket in :down:

100_2084.jpg

100_2082.jpg

100_2085.jpg

also have my gtr injectors in, z32 ready to go in too :D just need to sort out PFC now.

Need to sell off my old RB25 stuff to make wat for the new setup. Make some offers.

Greddy plenum,

80mm hypertune throttlebody,

Custom twin feed fuel rail suit top feeds

HKS bov x2,

6boost manifold,

Garrett T51r turbo,

turbosmart 60mm gate

Ported RB25 head with Tomei cams, cam gears, polished cam covers and splitfire coils

well, after examining the exhaust manifold on the weekend i noticed 2 snapped studs on cyl 6 so decided to take the whole manifold off.. in the end 3 more studs snapped :D so have a total of 5 snapped studs and 7 in ok condition. Will be getting a local guy to drill/ease out the snapped ones and get new studs and gasket in :D

Make sure you change the remaining seven studs, there would be nothing worse than breaking one on assembly (can happen) or poping one a couple of weeks later :)

name='Funz' date='7 Apr 2009, 12:46 PM' post='4522249']

well, after examining the exhaust manifold on the weekend i noticed 2 snapped studs on cyl 6 so decided to take the whole manifold off.. in the end 3 more studs snapped :D so have a total of 5 snapped studs and 7 in ok condition. Will be getting a local guy to drill/ease out the snapped ones and get new studs and gasket in :D

Make sure you change the remaining seven studs, there would be nothing worse than breaking one on assembly (can happen) or poping one a couple of weeks later :)

yup, sure do plan on replacing them all :)

yup, sure do plan on replacing them all :D

Where are you getting your bits from? The best place I found was Nissan, I brought new studs, nuts and gasket when I did mine. The manifold studs are an odd length and nissan appears to be the only place that has the right length. :D

Where are you getting your bits from? The best place I found was Nissan, I brought new studs, nuts and gasket when I did mine. The manifold studs are an odd length and nissan appears to be the only place that has the right length. :D

yeah, am going genuine nissan, gasket is like 108, studs and nuts are like 20ish.

  • 2 weeks later...

Well, over the last few weeks after my ding I have been searching and acquiring replacement parts to fix my car up. Things are going well and smoothly, and am fixing up all issues associated while its off the road :-)

Chris from southern thread repair arrived today to fix the broken studs and replace them , all done and now it's time to bolt it all together!!!!

currently have the following ordered ready to install :-)

exhaust gasket

exhaust studs and nuts

turbo studs and nuts

radiator hosing

timing belt

p/steer belt

alternator belt

water pump

headlights

Motul oil

lots of coolant

power steering fluid

brake fluid

oil cooler and relocation kit

z32 wiring cleaned up

finish off injector power wiring

gauge wiring

new front mount core

reo bar

radiator

also need to bolt manifold back on, turbo, and exhaust and intake piping :) gonna be a busy weekend lol.

well, new exhaust manifold studs in, gasket on, manifold bolted on, turbo studs in, turbo bolted on as well as exhaust to turbo. Inlet pipes all back on. Have a mate coming down this weekend to change timing belt to my new gates belt and also water pump and throw on my new p/steer belt and alternator belt :P

z32 all wired up and plugged in, injectors resistor back all wired in!

all needed now is my radiator support bar bent back into shape and i can start bolting radiator, fmic, headlights and bonnet mount back on. waiting on some replacement pins to mod my pfc up then do fluid flush and the car is ready for tuning :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...