Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

well , car now has new rear control arms, tie rods, hicas lock bar in , traction rods, new rear bushes, castor rods, adjustable front camber arms and new seat :P wheel alignment being done as we speak so hopefully can go get it in a few mins :D all prepped for highclere this weekend!

Spent a day with Andy.

Took Jamie for a run that night & I think its fair to say he was impressed.

Few last minute things to do and we are all set to go.

yeah, was chatting to jamie yesterday and he said how well your car went!

What's going on with my car, well it's just going onto the hoist so i can fit me new clutch,

remove the Hicas and all the line's, and fainlly fit the new front upper control arm bushes,

might even fit the ajustable rear upper arm's...

could have a bit on... :P

well , car now has new rear control arms, tie rods, hicas lock bar in , traction rods, new rear bushes, castor rods, adjustable front camber arms and new seat :P wheel alignment being done as we speak so hopefully can go get it in a few mins :) all prepped for highclere this weekend!

who did the wheel alignment? or more so who did you trust to do it lol?

Spent a day with Andy.

Took Jamie for a run that night & I think its fair to say he was impressed.

Few last minute things to do and we are all set to go.

rough figures? your not a forum warrior unless you have hektik ZOMG figures to boast about. Track times mean zilch

stock 26 on what, -5's with supporting mods with track work in mind.... thinking 18-22 psi and 340-380 RWKW's?

who did the wheel alignment? or more so who did you trust to do it lol?

this time since it was such short notice i got bridgestone select to do it, the rough alignment my mate did wasnt too far off perfect! next time might try goodyear, heard good things

GTR is currently in the garage undergoing some minor upgrades.

Turbos coming off to be replaced with a pair of new GT2860R -5's with some Tomei Expreme Dumps.

ViPec ECU is in and was running well until I decided it was time for the turbos to go.

New Castor arms up front, camber and traction arms in the rear. Camber arms for the front are currently being fabricated.

While I am doing this figured I may as well throw in a new Gates timing belt kit along with an N1 Water Pump. (Yes it does see a lot of track work so its worth the extra)

So, looking forward to the Highclere Hillclimb on Feb 13th. Should be a good shakedown for it all.

Andy wont have any problems adapting to ViPec... Did you get the plug in V66 or V88? I'd like to hear what Andy has to say about it, as I'm going to need a more comprehensive ECU when I get back.

I heard of a 33 GTR that was tuned there last week, same turbos as mine, put out 460rwkw atw on 24psi.

There is another 33 GTR getting round Hobart as well apparently that put out 440rwkw, think hat was tuned at the same place also.

Thats enough to convince me... :sick:

It's not so much the peak numbers that the cars put out, be the motors that last after he's tuned them... He tuned XRATED nearly 6 years ago now... the wot tune was spot on for racing, the stock 15yo bottom end lasted two seasons of racing before I blew it up using too much gass on a 200m skid.

460rwkw from -5's ... must be one hell of a head on it.

GL

Justin

stock 26 on what, -5's with supporting mods with track work in mind.... thinking 18-22 psi and 340-380 RWKW's?

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :P

Unfortunately I blew a hose or something today at the Hillclimb and lost 90% of my killerwasps and couldn't get a run in when the hill finally dried out. Had to sit in the pits and watch while I slipped from 2nd outright all the way to 12th as everybody got good clean runs in on the drying track... :blink:

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :D

Unfortunately I blew a hose or something today at the Hillclimb and lost 90% of my killerwasps and couldn't get a run in when the hill finally dried out. Had to sit in the pits and watch while I slipped from 2nd outright all the way to 12th as everybody got good clean runs in on the drying track... :)

i had such a shit day :domokun: i would of been better of running on foot for the event, bring on collinsvale i say to redeem myself lol

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :)

Spot on. Power delivery, reliability and consistancy is they key!

The gods were unkind.

Mine blew a cooler hose off and seeing the pits were a mud bath I wasn't climbing around underneath to put it back on.

Had to watch myself drop from 2nd outright to 12th by the end of the day when the track had dried out and everybody got about 4 - 5 seconds faster. :)

Jamie took out fastest time of the day. Impressing times early on in the wet and then even more so later as the track partially dried so there were mixed conditions on the way up the hill.

Edited by SSHatch
MMMMMmmm the skyline gods were unkind.

how did Jaymie go? I think I saw his car on saturday, in the cbd which made me think he didn't attend?

jamie was up there :) he set fastest time of the day and took out the event lol.

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :)

Did Andy have much to say about the ViPec? I'd be interested to know what he thought of it.

Times and mph... are the proof. I just do it for the FUN! HA hAH!

From what I can gather, Andy was his usual self and didn't really say much.

He did say that the software was pretty much just another version of the same old stuff.

He did have issues and had to use my laptop instead of his own as there is a very specific sequence that must be followed when installing everything for the first time. If its not done correctly then the wrong USB drivers are installed and the laptop wont connect to the ECU and they are very difficult to uninstall.

Jump on the ViPec website and check out the features for yourself. That and the support offered through the ViPec forums was enough to convince me to go that way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...