Jump to content
SAU Community

Recommended Posts

so currently my car has a turbo back exhaust and pod filter and boost hits about 11psi and drops to 10, im about to install a jjr return flow intercooler will it make the boost go up again? I know the stock ecu has a shit fit if theres too much boost, should i get a boost t to prevent that from happening? or should it be ok...

A 'boost teee' isn't going to get you less boost.

I don't think you'll see anymore than 1 psi or so increase with a different cooler, if any at all.

Justin.

Edited by XRATED

Ah k yeah I get what you mean, should have thought about that, thanks

Didn't think it would go too crazy, just read things about having too much boost on stock ecu, but I guess it's people turning it up themselves

When you planning on hitting the track Toffy?

honestly im not totally sure mate , i want the car tuned by the end of the month with all the goodies on it i've accumulated , it only needs indicators for the front and a rear ball joint (and wheels, which are on another car) to pass rego which will be done next week , then i can go to town on it :D . hopefully early Feb i want to take it out on a practice day/private track day or whatever you call it to do a little test and tune , then im hoping to make the first drift prac . it could all go to poo if something goes wrong with the car though , but that's my aim :)

When will yours be out and tearing up the track?!

Edited by toffy

I hate setting goals as I always seem to underestimate how much time things will take, but the good news is that everything is starting to go back in the car. I'd like to say it will be track ready by the end of the month but there's a couple of potentially time consuming things that are out of our control, so we'll see what happens :)

installed my return flow fmic wasnt too hard just takes a lot of fiddling around, doesnt help being massively hungover...

pretty happy with it just went for a drive and pretty surprised by the temp diff on either pipe.

next to change my thermostat and coolant then onto powercruise :D

hmmm so i changed my thermostat and bled the system ect ect, then went for a drive and then looked under the bonnet to see that coolant was coming from between the thermostat housing and block, so looks like the gasket sealant i used didnt work/i didnt use enough.

http://www.permatex.com/products/product-categories/gasketing/gasket-sealants/permatex--aviation-form-a-gasket--no--3-sealant-liquid-detail

that is what i used, left it overnight and then filled with coolant.

cause i have to do it again, should i use that stuff again?

i also have this:

http://www.supercheapauto.com.au/online-store/products/Permatex-High-Temp-RTV-Silicone-Gasket-Maker-Red-85G.aspx?pid=114981&menuFrom=51001#Cross

which would be better, i found that the first stuff i used, you couldnt use alot cause it would just drip, sort off cause it was too much like a liquid...

hmmm so i changed my thermostat and bled the system ect ect, then went for a drive and then looked under the bonnet to see that coolant was coming from between the thermostat housing and block, so looks like the gasket sealant i used didnt work/i didnt use enough.

http://www.permatex....t-liquid-detail

that is what i used, left it overnight and then filled with coolant.

cause i have to do it again, should i use that stuff again?

i also have this:

http://www.superchea...rom=51001#Cross

which would be better, i found that the first stuff i used, you couldnt use alot cause it would just drip, sort off cause it was too much like a liquid...

rb thermostat gaskets are pretty hard to do with sealant

it took me about 5 goes to do the stagea

the easiest way is to spend $3 on an actual gasket from supercheap

rb thermostat gaskets are pretty hard to do with sealant

it took me about 5 goes to do the stagea

the easiest way is to spend $3 on an actual gasket from supercheap

ha ha i was annoyed already at having to do it twice! 5 would make me crack the shits!

but i used the ultra grey and it would perfect.

had no problems at powercruise :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...