Jump to content
SAU Community

Recommended Posts

Just wondering, someone wants to buy the shell of my car with the driveline, but without wheels and suspension.

How do you get that towed?

I'm assuming you'd have to keep it on some sort of stand?

And you'd need a special company to do the towing?

Any help is appreciated, thanks.

Link to comment
https://www.sau.com.au/forums/topic/91419-how-do-you-towdeliver-a-shell/
Share on other sites

Hey dark,

Towing body shells is no issue for me, as long as you and the buyer don't mind the underbody of the car getting scratched from dragging onto the truck and sliding it off at the other end. Mind you it doesn't actually do any structural harm to the underbody...

Call me when you ready to discuss this further 0419877437..

Cheers

Hey dark,

Towing body shells is no issue for me, as long as you and the buyer don't mind the underbody of the car getting scratched from dragging onto the truck and sliding it off at the other end. Mind you it doesn't actually do any structural harm to the underbody...

Call me when you ready to discuss this further 0419877437..

Cheers

Shouldn't be an issue.

I'll give you a call tomorrow morning.

Thanks Jack.

Hey JAGR33 do you have a way to move em without scratching? dolly wheels or something?  Its a problem I seem to have too often, trying to move a car without wheels :(

Maybe tie the car to some packing crates (the ones for use with forklifts)..?

i might give that a go

Hey JAGR33 do you have a way to move em without scratching? dolly wheels or something?  Its a problem I seem to have too often, trying to move a car without wheels :angry:

Duncan, your right, the proper way to drag it onto the truck is to use what they call 'ambulance wheels', but only panel shops have usually got them... I don't have them coz they are big and bulky which means I can't store them anywhere on the track and the main reason being I hardly ever need them...

dark, palletts usually work but sometimes get caught on the end of the tray when dragging the car up, resulting in the car sliding onto the tray and the crate staying on the ground. Once you get it over the little lip on the tray it's all good, although getting it off at the other end can be a problem aswell....

The way id go about it

* Buy (steal) a 2 tonne pallet (i buy ~30 at a time for ~$12 each 2nd hand refurbished)

* Put car on jackstands and strip as needed

* Put pallet under the car and lower it on

* Get a flatbed with a forky (the same as what bricks are delivered on) to come and fork the car onto the flatbed

* Deliver as needed

Or.. the cheap ass method...drag it on as suggested above...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...