Jump to content
SAU Community

Custom R32 'skyline' Light-up Trick

Johnny Cash
 Share

Recommended Posts

Johnny Cash Experienced

Johnny Cash

Posted
Posted

Heya all,

I've been toying with the idea of getting a stock rear bar (R32), and having the 'SKYLINE' part of it light up at night...

I went to a custom bodykit manufacturer, and he reckons I could use a belt sander to shave the letters off from the inside, because of the indentation on the letters. Alternatively, if that doesn't work, then I might have to sit down with a die grinder and do it all VERY carefully! If i slip up just once, it will ruin the whole thing ;)

Then I would need to put a perspex sheet behind it, and seal it so its watertight. Then just run a couple of globes from the rear lights to it, so it comes on with the lights. If I angle the lights right, it should light up the entire sheet of perspex, if you all know how perspex reacts to light :D

Kind of hard to explain what I'm getting at, but if you use your imagination, I think it will be a worthwhile mod - would also give all of these used R32 rear bars a new lease on life! :D Can put all sorts of colours through it, or even use a multi-coloured neon with colour selector in the cabin.

It's bound to set one 32 apart from another, and that's what it's all about, in an age dominated by BN kits and Vertex bars. B)

I've got a few other crazy ideas on mucking around with 32s, if anyone cares to hear 'em...

Adrian.

Link to comment
https://www.sau.com.au/forums/topic/91513-custom-r32-skyline-light-up-trick/
Share on other sites
IOWNU Grand Master

IOWNU

Posted
Posted
Heya all,

I've been toying with the idea of getting a stock rear bar (R32), and having the 'SKYLINE' part of it light up at night...

I went to a custom bodykit manufacturer, and he reckons I could use a belt sander to shave the letters off from the inside, because of the indentation on the letters. Alternatively, if that doesn't work, then I might have to sit down with a die grinder and do it all VERY carefully! If i slip up just once, it will ruin the whole thing  :)

Then I would need to put a perspex sheet behind it, and seal it so its watertight. Then just run a couple of globes from the rear lights to it, so it comes on with the lights. If I angle the lights right, it should light up the entire sheet of perspex, if you all know how perspex reacts to light  :P

Kind of hard to explain what I'm getting at, but if you use your imagination, I think it will be a worthwhile mod - would also give all of these used R32 rear bars a new lease on life!  :) Can put all sorts of colours through it, or even use a multi-coloured neon with colour selector in the cabin.

It's bound to set one 32 apart from another, and that's what it's all about, in an age dominated by BN kits and Vertex bars.  B)

I've got a few other crazy ideas on mucking around with 32s, if anyone cares to hear 'em...

Adrian.

Sounds good.

Post up some pics if u manage to get it done.....

funkymonkey Grand Master

funkymonkey

Posted
Posted

you mean like this?

lit_up_arse.gif

welcome to 2002 :P

The part that lights up is a factory option that came on R32's from certain dealers in japan. It lights up slightly blue due to the EL sheet it uses. You can pull the EL sheet out (as it usually craps itself after a few years) and replace it with surface mount style LED's.

**JaR** Grand Master

**JaR**

Posted
Posted

yeah my 33's got that. lights up a bluey green color..... like so.....

and yes the cops will harass you about it, coz they did with me and thats the reason why the wire is now disconnected so it doesnt light up anymore. ;)

post-14874-1129676911.jpg

RB-Sam Enthusiast

RB-Sam

Posted
Posted (edited)

yeh i have this on my 32 but it doesnt light up as its not connected wouldnt mind gettin it to show white light

i couldnt see anyway of f*kin around with the lighting tho, but in the day looks good as you can acutally read it

Edited by RB-Sam
Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

Dammit! I thought I had thought up of something original! Oh well, I've got a few other crazy ideas for modding the 32 unlike anyone else's I've ever seen. Might have to keep them secret until I do it all... B)

Planning on pretty much doing a full-custom bodykit and interior, but I won't spoil the broth and spill the beans at the minute. You'll all just have to wait! :)

funkymonkey Grand Master

funkymonkey

Posted
Posted
On what grounds did they harrass you about it for??  Sounds like a load of crap to me, i can't see anything that they could possibly pick on it for...

yeah I've never had any issues with mine, as when I'm driving normally it dosen't do the knight rider thing, it just acts like a regular brake repeater and all 7 characters light up. Pretty much like a high mount brake light.

Patto- Mentor

Patto-

Posted
Posted
On what grounds did they harrass you about it for??  Sounds like a load of crap to me, i can't see anything that they could possibly pick on it for...

Any light on the back of your car needs to be red, or it can be considered defective. The same goes for the sides which have to be orange and the front has to be white.

That said I have seen a cop defect a car for having Altezza style rear lights. The guy pleaded with the cop that there was nothing wrong with it. The cop said and I quote "I'm a police officer and I say its defective so its defective."

So really they can get you anyway they want. I guess its easier to get it cleared than take it to court, which means cops can defect just about anything thats not standard.

Patto- Mentor

Patto-

Posted
Posted
altezza lights are almost always illegal. thats why they say "for off road use only" when you buy them.

factory mazda 1's are obviosuly going to be fine

Ok. I was told different. Like I said I had always thought that as long as you had red on back etc. you were fine. Especially since Altezza lights do exactly the same thing as normal lights.

funkymonkey Grand Master

funkymonkey

Posted
Posted

altezza lights are defective if they don't have red reflectors on them. Most ricer opt not to get reflectors as they're not JDM tyte enough with em on.

I guess my rear "SKYLINE" lights up red with the brakes, so that's why I don't get hassled about it.

**JaR** Grand Master

**JaR**

Posted
Posted

yeah and mine lights up like a bluey green color like in the pic.

the reason was, coz its an "aftermarket lighting feature" pretty much using the same grounds to harrass you the same way as if you had underbody neons. thats the reason i got, and yes i think its a load of shit, and am thinking i should just hook it back up again and not care, coz i didnt get fined, just asked "nicely" to have it disconnected.

and dezz yeah i will say that if i get asked about it again when i hook it back up :(:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...