Jump to content
SAU Community

Recommended Posts

Rota DPT's look nice!, what size tyre?

I was thinking about rota boosts in 18x9 +27, will i have any fitment issues without coilovers? S.2 automatic

Should be be pretty flush with the guards as its within 3mm of a R34 GTR rim, what size tyres are people running with R34 GTR rims?

cheers

darren

Thanks mate, I'm happy with them... I'm running 235/40 so there is a bit of stretch. I Could have gone 245 but there isn't really much room to play with as the rear is quite low.

You should be right with those specs, The rear will be close to flush but fronts as u know are 25mm narrower - I've previously run a 9 +38 with a 245/45 which was too close to the strut...with the factory struts I think u have less clearance so maybe go a 245/40 :thumbsup:

Edited by adey88

My S1 with TE37s (33 GTR offset: 17x9 +30) using 20mm spacers to make the front the same as the rears, Tyres Contisport 3 255 40 17. I will be going a tad lower still but tyres will tuck in as I have adjustable camber arms front and rear (mainly for my slicks but I won't bother putting them back to stock during the summer).

002-4.jpg

for anyone interested in some varrstoen wheels, heres a reply i recieved from them today

19x9.5 +22 fits great on a stagea ,

We have them landing in december for $1295 +80 del to VIC

And with Federal 595 evo tyres $2495 delivered

for anyone interested in some varrstoen wheels, heres a reply i recieved from them today

19x9.5 +22 fits great on a stagea ,

We have them landing in december for $1295 +80 del to VIC

And with Federal 595 evo tyres $2495 delivered

sorry i should have put varrstoen 2.2 wheels so u know which ones they are. they look like then ROTA Grid wheels

Our Nissans are 66.1 centre bore. Unless you get some Nissan specific rims most aftermarket items have a centre bore of 73.1mm.

You can get plastic locating rings but better to get metal ones like this:

http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/other/auction-421179978.htm

+15 will stick out somewhat - you'll have to deal to your guards (see the pic above #342 of my car with +30 - ---+15 will stick out half an inch more and my gaurds have been pushed out about 20 mm

1321012210[/url]' post='6105856']

Found some cheap GTR fittment wheels. 18x9 +15. Am I correct in thinking they will fit my rs4s? Need an answer ASAP please!! Cheers guys.

A +15 will look good - you may need to slightly roll the rear guards (depending how low u are) but since it's a manual you should ave more room to play with.

What wheels are they anyway?

post-81631-0-58801500-1321071878_thumb.jpg Yeah I just did a heap of reading through here and found a white rs4s running 18x9.5 +15 with 8mm slip on spacers for the rear to gain strut clearance on page 11 and it looks perfect. The wheels I'm lookin at are only 9" so that gives me 7mm more clearance inside and out. Shouldn't need to run a spacer and don't want to! I'm still at stock ride height (much to my dismay!) haha. I believe they're a Lenso D1r... Edited by BMX666

So you got the varrstoen's then? I've been keeping an eye on everything Stage on here for a while now hahaha. I'll find out if i got mine tomorrow.... Just need to drive to Sydney (about 600k's) to get them, then put tyres on them! Looking forward to the pics tho...

post-81631-0-58801500-1321071878_thumb.jpg Yeah I just did a heap of reading through here and found a white rs4s running 18x9.5 +15 with 8mm slip on spacers for the rear to gain strut clearance on page 11 and it looks perfect. The wheels I'm lookin at are only 9" so that gives me 7mm more clearance inside and out. Shouldn't need to run a spacer and don't want to! I'm still at stock ride height (much to my dismay!) haha. I believe they're a Lenso D1r...

They should look good on the stag, looks like they have a bit of dish too!! If you coming to sydney to get tyres check out Tempe tyres, they are usually cheap and have stock of most tyres (I have no affiliation with them btw) :)

Nah I'll get tyres locally down here. Just have to drive up to pick up the rims. Going to be a big day if I get them!! I know Tempe and I know they're good. Although I've been stuff around by them in the past when getting wheels for my 5L VQ Statesman. Probably wasn't all their fault as I was in a rush and they kept saying they're coming they're coming for about 3 weeks. Ended up getting the same wheels in a different color, cheaper and in about 3 days from somewhere else. Although they had the sane bank account so I guess they still got my cash in the end. Haha. 7 day wheel and tyre or something like that. I'd give Tempe another go if I wasn't in a rush tho. Not dissing them at all.

i didnt get the varrstoen wheels. i got some Koya Endless wheels custom made to my offset choice they are the blackwheels with chrome inserts.they arent bad,not really as jap spec as id like, but meh $1800 for the wheels and tyres is not a bad price.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...