Jump to content
SAU Community

Recommended Posts

Just getting my GReddy plenum installed with a bunch of other stuff. wondering what is the best option to do now for my windscreen water bottle, as it has to be taken out to make way for the new piping.. I dont want to have to do without windscreen washers.. what have others done in this instance?

Also regarding the throttle body, what are my options there as the standard one is too small and need to upgrade to a larger one. Is there any bolt on fits of any other cars rather than going the GReddy one?

Cheers...

Link to comment
https://www.sau.com.au/forums/topic/93778-greddy-plenum/
Share on other sites

GTR have the piping with a 90 degree bend in it as the plenum faces straight off the front of the engine where as the RB25 (I assume its not RB26 cause you don't need to move the washer bottle for it) comes out on an angle so you need to ditch it. I'm thinking about getting an custom alloy one made up as there's plenty of room round my piping to fit something small there. I've seen some cars with greddy plenums come over from japan with whats called a Roo Bag. Its like a sold floppy plastic bag that seals and you connect it to the stock washer pump and just let it flop around your engine bay. Not sure if their legal or not.

Link to comment
https://www.sau.com.au/forums/topic/93778-greddy-plenum/#findComment-1694735
Share on other sites

what ever you do don't buy a throttle body off one that has traction control, you've got to hack the crap out of it to get it to fit. Theyrange in price from about 400 bucks upwards depnding on supply and demand at the time.

Link to comment
https://www.sau.com.au/forums/topic/93778-greddy-plenum/#findComment-1697050
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...