Jump to content
SAU Community

Recommended Posts

Im missing the before pic here but the buildings are approx. 80m away. The car is pointed upwards. In situations like this there is a stupid amount of foreground light (directly in front of the car) which is why I made up fore ground limiters (a bigger shield) to block some of it. I decided to drive around for a bit without them for a while first

the before pic there wasn't any real light on the building, it stopped at the cars

post-83906-0-84641200-1406900688_thumb.jpg

Nice work, massive difference aye.

Yeah the damn glass diffuses the output, I have like multiple cutoff and orange/yellow-ing.

I also found the driver's side projector to be pointing too much to the driver's side (from factory?).

  • 2 weeks later...

Yeah its the glass shape, if it were a smooth curve most of this will probably be eliminated.

Im looking to borrow a H3/H3C (maybe H1?) HID kit if anyone has a cheap kit they are not using. I wouldn't mind seeing how the stock projector goes with some mods. Mainly thinking of shortening and making a custom cut off shield and foreground limiter.

Only need 1 side for 4 weeks max, prefer Sydney, im in Bankstown area

Euro Lux are bright and wide. They have ECE cut offs so expect to blind everyone in front of you on the side which has no real cut off. I was in front of one and it was reflecting off my side mirror, super annoying and distracting, I couldn't get my head out of the way. If you use them make your own cut off, if your following a cop and he see's that kind of stuff from his side mirror he will book you

  • 2 weeks later...

Iv just ordered FX R stage IV with the following options

attachicon.gifImageUploadedBySAU Community1409967046.647053.jpg

Thank to tom for help too cheers dude

Just had a quick look on TRS for you, if you're using D2S bulbs I'm not sure if you should be getting the 9006 relay or not since the H1/H3 relay is if you get H1 or H3 bulbs. Maybe start a chat with TRS and see what they say.

Just had a quick look on TRS for you, if you're using D2S bulbs I'm not sure if you should be getting the 9006 relay or not since the H1/H3 relay is if you get H1 or H3 bulbs. Maybe start a chat with TRS and see what they say.

That wiring harness is correct. Input is H1/H3, output is 9006 (what the Denso's have).
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...