Jump to content
SAU Community

/\/orthside - Dinner - Tuesday 4th Feb


Recommended Posts

Jagshemash...

To continue on with our weekly tradition, this comming tuesday we will venture out to Kaiser Stubn to dine on the fine foods offered by Austria.

The restaurant is located on mona vale road (so its easy for team westside to get to)..

205 Mona Vale Road, Cnr of McCarr’s Creek Road, Terrey Hills.

However there is a burger king down the road so if you wanted to we could meet there before hand. Up to you guys.

Suggested time for dinner is 7:30. Let me know.

If you want to come please let me know. I will make the booking on monday.

http://www.classic.com.au/wizard/KaiserStubn.htm

NOTE!

MEET AT 7pm in the CARPARK for BK. Its easy to get to, just head down Lane cove rd / mona vale rd until you get to terry hills. As your putting along you will come across the BK.. Go in there and I will be waiting. I shall leave that car park at 7.30 sharp and head to the restaurant. So if you are wanting the easy option or just to meet up before hand meet me at BK.

Attendance List so far....

Carlo

BYBY

Duncan

Kelly

Brendanf

Duncan

Kel

RONIN

Tex

Randy

R33Deviat

Merli

Link to comment
https://www.sau.com.au/forums/topic/9436-orthside-dinner-tuesday-4th-feb/
Share on other sites

  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic




  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...