Jump to content
SAU Community

Recommended Posts

Hi ppl,

Just hunting round for a decent electronic boost controller and at the same time not spend too much.

I was looking at the Greddy Profec B-Spec II and the Turbosmart E-Boost 2 ones. Bit pricey but hoping to maybe find S/H.

Just want to know from peoples experience which has been good for them etc.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/95060-which-electronic-boost-controller/
Share on other sites

hey Pulp,

I've got an Greddy Profec -A, althou its not the one your looking at, i find it to be top, holds boost perfect and very easy to tune.

so going by that i would say the Profec B would be very similar.

Just had a quick look for Profec B and looks like the range from $300 to $500, if you cant get one for cheaper than $400 you might aswell go something like blitz ID-3

I know it's a bit off, but personally, i'm a Apexi fan. So it's the AVC-R. There's a reason why Apexi has not upgraded the AVC-R since it's launch, cause it just works so well. There is not much of a need to upgrade it. Some pple said that the AVC-R's solenoid is a perfect replacement for a skyline, which i think is just biasedness again, and should be bullshit. LoL.

My .5 cents worth. Again, remember. I'm a apexi fan. LOL

Thanks guys!

EVL, I'll check out the Profec -A, sounds ok.

KeeFy, yeah I like the Apexi gear too, am def getting an SAFCII and wanted an e-boost controller as well, but I think the AVC-R is pretty pricey compared.

I'll see what I find!

Doesn't really matter I spose Dan, is it better to buy through Nengun?

Although been speaking to Lumpy at Hyperdrive and he said cause my trans is Auto, to get the HP I want I'd have to go either PFC or a Greddy E-Manage kit. The SAFC combination wouldn't control or handle timing well etc.

The PFC would cost me more cause it takes more to tune with auto. So the E-manage kit would be a slightly cheaper and better option as it can be piggy backed.

pfc Does not work with auto nissans.

already been down this path.  I ended up getting  the emanage ultimate and profec e 01.

Yeah I'm thinking the same thing hey!

Did you do anything to the trans anyway? like any mods etc, or did it handle it fine?

no mods to gearbox as yet. will be getting shift kit form mv automatics though. PFC just will not work with the shift logic of the skyline gbox. I would have prefered pfc, but atleast you can hook emanage up to laptop and tune it yourself.

yeah i thinking of getting an electronic boost contoler looking for second hand APEXI AVCR i think they seem to be able to do the most rather than just plain two boost setting and thats it. Mines also auto buy yeah its a r32 so different to you guys.

Mad34 let me know when you get the shift kit from MV i was gona get one too and a trans cooler maybe cheaper to get together even if they are different

Hmm I've known a few people with AVCRs and even though they look nice, they've all had dramas. Not holding boost, too tricky to use etc etc. One of them switched to a Greddy Profec B Spec II and said it was awesome. Controlled boost a lot better.

But I do admit the AVCRs look sweet :)

E boost 2 are the best no spiking + you get a boost gauge with it

they are australian and the after sales is exerlent

i have one and was unhappy with it so i e mailed turbosmart and 30seconds no shit i had a phone call asking wat was wrong

they promtly told me how to use it my self now i agust it and my car is running very good

i have set it so good i hav the best power band and wen i get an e management i will play around with it again

james

theres a new blitz i-color or something with the slick colour screen and more logging/display options . the id3 has a mono screen and still has some pretty good monitoring/logging options

the duty cycle/boost curve learning thing can be tough to setup but its great when its working . the blitz can be set to manual if you want to go old school

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • 2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
×
×
  • Create New...