Jump to content
SAU Community

Recommended Posts

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

Dude i am in serious need of a ball joint situated in the control arm...

I need the left front lower control arm which has 2 ball joints, the suspension ball joint and the inner ball joint which joins the control arm to the chassis. the ball joint i need is the inner ball joint.

I am happy to buy the lower control arm with the ball joints in it ..... but am a little weary of the condition and the lateral play within the ball joints......

Could you please PM me, and are you able to show me any photos?

Cheers

Ryan

parts of a 1990 R32 GTR black in color, situated in hobart, cheap freight available.

- RB26 cylinder head w/Plenum, Injectors, Fuel Rail, Throttle Bodies, etc - $1400

- TRUST FMIC - $600 inc piping   

- Bonnet ( excellent condition) $450

- Front bar AND lip spoiler - immac - $400

- standard GTR exhaust, good cond, $250 

- 90mm s/steel exhaust, canon type muffler, 4bolt flange, massive, exc cond $475

- 1x Std GTR Turbo with all fittings, great condition $300

- 1x Std GTR Turbo, minor shaft play, worked OK when engine removed, $100

- control arms - $60 ea

- tie rod ends - $50 ea

- RHS front headlight - $130 

- RH Front Guard ( having 2 very small dents, easily repaired) $200

- LH Door Exc Cond ( inc glass and motor, but not door trim or mirror) $190

- RH Door Exc Cond ( inc glass and motor, but not door trim or mirror $190

- K-Frame - $200

- ABS Unit and piping $200

- Waterpump ( perfect working order) - $50

- Power Steering Pump - $200

- Sunvisors - $40 ea

- Boot Lining - $50

- glovebox - $50

- centre console and lid $100

- brake rotors, plenty of meat left on them - $70 ea

- Rear Parcel Tray - $50

- bootlid ( needs attention - no wing or badge) $25

- Standard rear tail light assemblies L&R, full units, $90ea

- Standard GTR full dash cluster - $300

- Rear reverse lights - $30 each

- Rear bumper bar - slight damage and scuffing - $50

- rolling ( compliable) shell - $2990

- Rear Calipers - $100 ea            *****DEPOSIT TAKEN*******

- Front Calipers - $450 pair          *****DEPOSIT TAKEN*******

- Strut bar ( engine brace) - $125  **** DEPOSIT PENDING******

Cheers,

J

hey mate im after the bonnet, 2 quick questions is it an aluminium bonnet and secondly u wouldnt happen to have the lh bonnet hinge also. I need the bonnet catch and support bar also. lastly whats fright to melbourne worth?

Sieng,

Yes mate I do - what parts exactly do you require?

Esprit,

Dash cluster in EC, showing 112K klms, really don't know if it will fit or not. maybe post a thread up here to get feedback?

GT-T R34,

Reo is sold mate. can only supply you with bonnet. would be asking price + $50.

Nur Spec,

yes, it's aluminium. can supply hinges, catch and support bar and freight for asking price + $125

Ryan R32,

Will have to speak with my mechanic. if it won't render the car an unrollable pig of a thing then I'll be able to get this done. if it means car suddenly becomes somewhat immobile I probably can't

cheers all

updated parts and prices in the hope of answering some of the random questions I am getting ( esp re freight).

car will be getting moved at end of Dec and parts may not be available for 3 weeks after this.

Hey,

If the bonnet has NO damage or anything untoward, I'm willing to hit up $400 including freight to Adelaide, S.A. ? The trade-off is the money is ready and waiting, so it's all on you. :D

Like I said, I don't want one with stone chips or anything. Seen some going around that need more work than they're worth, and people still asking $500+

Also interested in grill, but you don't seem to mention anything about it...

If you're keen, e-mail on [email protected]

Thanks,

Adrian.

omg. do you still have the front bar and lip for the 32 GTR. i need it sooooo badly some f***er stole my lip at the docks before i got the car.

im in SYD.

call me ASAP 0414879711

cheers.

Jeremy

Hey mate, I was after a drivers side reverse light, the boot lid and a few interior parts - the surround for the a/c, sterio brackets and a passenger speaker grille, I am in Hobart so I can pick them up, is the car still at dave griffiths? and what $, [email protected] if you can help, thanks muchly :P

Tovar - not sure of cooler dimensions sorry. have posted a photo if this helps.

Hey after the rb26 head, is it in good condition? does it come with valves etc? call me to arrange payment . 0422877975. cheers

SLO GTR - yes, good condition with valves etc. Will contact you tuesday PM.

Hey mate, I was after a drivers side reverse light, the boot lid and a few interior parts - the surround for the a/c, sterio brackets and a passenger speaker grille, I am in Hobart so I can pick them up, is the car still at dave griffiths? and what $, [email protected] if you can help, thanks muchly

Dave - Griffo has wound up now, not sure if you were aware of this. Will talk with Scott ( who now runs the yard) to see if we can get you some of these parts - not the a/c or gearbox surround tho - I need em!

Jetman - have replied in kind re the 17 x 11J AVS Model 6's

DVS32R - sorry mate - front bar now off the market.

hi im after a gtr bonnet and grill if u have them could msg me and let me cost and price and if so send me pics to thanks

Hi Robbie,

Couldn't quite make this out?

Do have the bonnet, don't have a grille. price is in the original post. let me know if you want it.

cheers,'

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...