Jump to content
SAU Community

Recommended Posts

Hi Guys, well what a pain in the arse that was... Just fitted my 'D1' aluminimum intercooler piping to my china copy front mount. Things just don't line up as they should and it doesn't sit exactly straight (but I can deal with that later, lets get to the real issue).

After fitting it all (what a pain in the arse that was) I ticked it over and gave it a rev not noticing anything strange but with my blitz BOV in one hand and the throttle in the other I put 2 and 2 together! (Why is it still shooshing??) :)

I noted it was coming from the air pod and figured it was venting from the factory plumb back, through the turbo and back through the filter?

My question... Is this normal and has anyone else experenced it and if not, whats the problem?

Also, it is not as loud when driving and definatly not as loud as with the blitz.

Thanks all,

Todd

Link to comment
https://www.sau.com.au/forums/topic/95876-installed-fmic-and-removed-bov/
Share on other sites

YAY! Thanks mate! Now I can sell my valve... he he he

To be honest, I was very surprised with the difference. I am running 12psi and it seems to get there quicker and stay there!

Mose people report a loss or no improvement but I must say it is alot better and I only have 3" exhaust, cheap pod filter and boost controller along with an engine that needs a good service.

Also, can anyone tell me while I am at it why in second gear it coughs a bit when getting on boost (not all the time)... I know I need to give it a service (haven't done one since it got here - only been 2 weeks but I know it is a big no no)...

I am guessing with a new set of plugs and some fresh oil it will be right! I need the timing belt done too, how much should I expect to pay someone else to do it for (looks like too much of a pain to do myself)...

Thanks guys!

Todd

This is normal :)

Edited by CATKICKER

a fair workshop will charge u 280 for a timing belt replacement including coolant etc

anymore more than say 330 is a rip off.

it probably needs a good service along with spark plugs , fuel filter, etc thats what could be causing the hesitation in second gear.

Fit a cold air intake using one of your old intercooler pipes thru the spare hole below your pod filter and get a shield for the pod filter u will really notice the difference. also with the repco "monza" heat shield my pod now emits a "wtt-oosh"

i guess the air bouncing off the shield :)

Thanks a lot guys!

I will have to get the belt done and I will as you suggest give it a full service including engine oil, oil filter, gearbox oil, fuel filter and plugs.

When I get the belt done is there any special timing I should get it set to? And when buying the oil/plugs, are there any particular items that work best in an RB20?

Thanks!

Todd

a fair workshop will charge u 280 for a timing belt replacement including coolant etc

anymore more than say 330 is a rip off.

it probably needs a good service along with spark plugs , fuel filter, etc thats what could be causing the hesitation in second gear.

Fit a cold air intake using one of your old intercooler pipes thru the spare hole below your pod filter and get a shield for the pod filter u will really notice the difference. also with the repco "monza" heat shield my pod now emits a "wtt-oosh"

i guess the air bouncing off the shield  :D

my car makes that noise(RB25) with fmic cat back pod, but iv bn told and also read in fast fours that if your running more than stock boost it can be harmful to your turbo....there was a thread about this last week also......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...