Jump to content
SAU Community

Recommended Posts

Can Someone please direct me as to which section i need in the ADR rules for pod filters and Intercoolers?

I was defected for my pod last friday, although it is in a box. the cop also sent me a traffic infringement notice today for driving vehicle non standard. at the time i was defected he told me anything non standard is illegal including using non factory type tyres. obviously i knew this was b/s so contacted my solicitor straight after.

anyway please help this is already going to court!

dscf02052kx.th.jpg

This is the pod box.. the cop said it was as much of a defect as the pod itself as it was non standard.

Edited by MintR33
Link to comment
https://www.sau.com.au/forums/topic/96115-need-adr-rules-apap-please-help/
Share on other sites

Can Someone please direct me as to which section i need in the ADR rules for pod filters and Intercoolers?

AFAIA the ADR's don't specifically cover pod filters or intercoolers, they are actually EPA issues to do with intake modifications effecting emissions. According to VicRoads, at least, pod filters are not an 'engineering issue.....refer the EPA'.

Suggest you contact engineers (not the desk drone) at your local rego authority (wherever you are) as well as the EPA.

The only way I see you can win your case is if you provide proof you have not exceeded emissions levels set by the ADR's your car is complied to. The reason is, you have modified the standard emissions system which is proven by the manufacturer to pass relevent emissions standards.

Seeing as this is an expensive test that you will have to incur the cost of, and pod filters are widely regarded not to offer significant power gains, I would just remove it.

The first page of a google search will show you the emissions composition for the relevant ADR standards here:

www.npi.gov.au/handbooks/aedmanuals/pubs/motorvehicles.pdf

Edited by drunkenmaster
AFAIA the ADR's don't specifically cover pod filters or intercoolers, they are actually EPA issues to do with intake modifications effecting emissions.    According to VicRoads, at least, pod filters are not an 'engineering issue.....refer the EPA'.

Suggest you contact engineers (not the desk drone) at your local rego authority (wherever you are) as well as the EPA.

I agree, cops usually enforce RTA regulations and not ADRs. Ask to speak to the engineers at RTA and they should set you straight about what's what. Keep a level head and they are usually easy to get along with. An infringement for non standard? Was it specific? Just about every car on the road is non standard in one way or another, try to find out the parameters they use to determine this. And WRITE DOWN EVERYTHING THAT YOU ARE TOLD BEING CAREFUL TO NOTE NAMES AND TIMES. Another source is tech help at the NRMA believe it or not, you'd be surprised at what these guys know.

Good luck

paul its a small town with a few cops (leeton, nsw)

he does have 2 live there n the cop will keep hounding him. if he gets the law on his side he can then write down times that he gets pulled over etc from this cop and put an harassment order on him. this makes the police in his town stay away from him for 6 months unless it is warranted. this has happened b4 to one of my mates who lives in vic.

paul its a small town with a few cops (leeton, nsw)

he does have 2 live there n the cop will keep hounding him. if he gets the law on his side he can then write down times that he gets pulled over etc from this cop and put an harassment order on him. this makes the police in his town stay away from him for 6 months unless it is warranted. this has happened b4 to one of my mates who lives in vic.

Yes, thats pretty much the reason for it. this is by no means the first time i have been targetted for doing nothing more than driving a skyline in a place where V8's are the dominate species.

I'm sick of letting it slide because all that is happening now is they are taking advantage of me, thinking i am just going to give in each time.

Small town, and them pulling out the ADR one...

Out of interest, did you sleep with this said policemans daughter and get caught recently?

I think you will find he's pretty much spot on with the ADR thing. But you must have done something to really annoy them to pull that one on you.

I thought the air pod was more of an EPA noise issue than an EPA emissions issue.

Atleast that's what my engineer said - something about cops pulling bullshit about pods because it's linked to noise, but he also said the noise and pod logic only really applies to rotories because they are very loud through pods.

Either way good luck good on ya for goin to court.

first thing. is it engineered?

the reason pods are ilegal is. they dont offer the same flame traping properties as a sealed air box. and noise emissions i think.

(yes its not like a backfire is going to go all the way down 2 or so metres of plumbing and a turbo!)

to make it legal it has to be "out of site"that is what my engineere said for him to engineer it.

i think you may of got bent over by an ignorent cop.(there are plenty)

it usaly helps if you put your mechanics licence next to your licence in your wallet so they see it. no more gay defects after i did that!!

by the sounds of it you need to be armed with a enginereres cirt folder.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...