Jump to content
SAU Community

Recommended Posts

Mate that was some awesome burnout, was starting to get really jack of the sh!t performances out there, then you took it up a notch. :)

I *MIGHT* have some on my camera but i can't remember I'll check it out tonight.

Edited by Oosh

that pad is f*kn shithouse. buy the 3rd round i was hitting the pot holes and it was f*kn up my spin. theres no room to swing a cat and they told me if i stand still again i'll get disqualiphyed.

speedway city ownes collinsgrove.

but i hear there are new pads coming up all over the place..

Talemn Bend anyone.

Yes, we decided that the burnout pad really needed to be about 1/3 longer in each direction to swing cars around without fear.

Happy Birthday to my wife as well, who let me go instead of shopping with her and her family on her birthday!!!

mmm so chunky you can carrve it..

close. its the quad cam VG same at the z32's but only single ball bearing turbo. forgies and shot peened rods, stock.

running 10 w/o cooler. coolers coming from japland atm.

Head up to Blackwood Auto and Dyno.

$35 for a power run. :(

My Rb30DET running the stock rb20det turbo where it made 176rwkw at 9psi, which is most definitely slower than how it feels now without a tune running the vg30det turbo.

Mine will spool up to 13psi by 2100rpm (appears to surge or some thing under that) general driving say rolling out of a corner at low rpm and booting it will see 13psi or so at 2500rpm. It appears to pull hard until 5800rpm, all though it does go a lean after 5500rpm. Needs to be tuned.

Edited by Cubes

that van allways puts on a good show.

but after all that i got second in the 6cyl class, beaten by the UC torry cause 3rd round f**ked up.

there were potholes in the pad by the 3rd round. it was a joke. i didn't know what was stopping my spin till after. i thought it was the rear bags were failing but i was hitting the potholes stopping my slide so i was getting stuck up against the armco. and pissed off so stuffed the rest up.

bloody good day thoe. some very quick cars and some... well...

i heard from an offical that the kingswood rocked up with a generator belted up in the passenger seat with an extention cord running to a leafblower set up as a s/c..... :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...