Jump to content
SAU Community

Recommended Posts

Without quoting everyone :

Yes, some race fuels use ethanol, some race cars run on %100 fuel blend ethanol.

Yes, extra 2 ron will allow you to tune the car more aggressively and will yield more power.

Yes, %5 blend is next to fark all.

However, there is a situation here which is as simple as 2+2.

-Shell releases a new fuel containing ethanol.

-Nissan Aust releases a press release stating all their pre 04 cars are not recommended to be run on a fuel containing ethanol.

So, i personally wouldn't touch this fuel on my Skyline if it was my daily commuter, not till i found out the problems using this fuel -may- cause, in long term.

If the car is used in a competitive environment like the race track, than it wouldn't be such an issue. Ethanol blend just adds to other 100 considerations you face on the track.

This is my opinion on the subject that was derived in seconds of having the facts. :O

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

As stated above, Nissan are just avoiding possible lawsuits, as you would. You reckon they researched the effects of ethanol before they released that statement......? It's smart business, cover you ass, whenever you can.

Argh...

Do you think Nissan Aus. released that statement just for the sake of it..?

While the majority of other car manufacturers do not see a problem with using ethanol blend fuels, are the people @ Nissan Aus. only smart ones to state otherwise...?

There is a possibility that the engineers @ Nissan would know a little more on this subject tha you and I. There obviously is/are parts that are used in the manufacturing of their vehicles that may react negatively to fuels containing ethanol. At what percentage do they react...? If you know, please enlighten us.

On the peanut analogy where a product states : "this product may contain traces of nuts", sounds a little different to "this product DOES contain ethanol"

If you were allergic to nuts, would you eat a product containing any...? A product that lists nuts as an ingredient, not one that may contain traces of some.

The only actual statement I've heard from Nissan is that they don't recommend the use of E10 fuel. As far as I know they have no policy on E5 fuel and everything I've ever heard about E5 says its safe for just about any car, if not every car.

Argh...

Do you think Nissan Aus. released that statement just for the sake of it..?

While the majority of other car manufacturers do not see a problem with using ethanol blend fuels, are the people @ Nissan Aus. only smart ones to state otherwise...?

There is a possibility that the engineers @ Nissan would know a little more on this subject tha you and I. There obviously is/are parts that are used in the manufacturing of their vehicles that may react negatively to fuels containing ethanol. At what percentage do they react...? If you know, please enlighten us.

On the peanut analogy where a product states :  "this product may contain traces of nuts", sounds a little different to "this product DOES contain ethanol"

If you were allergic to nuts, would you eat a product containing any...? A product that lists nuts as an ingredient, not one that may contain traces of some.

Well most evidence suggests that E5 fuels have little impact on engines.

With a good tune, I don't see why a person should refrain from using it, it improves performance and that's the bottom line. I'll bet my bottom dollar, that there is NO difference in an 03 and 05 model car's engine, from Nissan. The only reason they are saying that it is ok for new cars, is in case it effects sales somehow. Think about it, how have they upgraded the Pulsar, Maxima etc?

Anyways, I'll wait a bit for the first test batch of lines to go through, if there are no dramas, then yeah, I'll start using it myself, if there are dead engines all over the joint, then obviously i'd refrain.

Peace.

The only actual statement I've heard from Nissan is that they don't recommend the use of E10 fuel. As far as I know they have no policy on E5 fuel and everything I've ever heard about E5 says its safe for just about any car, if not every car.

Ethanol is ethanol, its there or it isnt.

If Nis Aust say 10% no good, then 5% ethanol... is what, just a "nothing" ?

A warning against Ethanol is just that, its like giving a warning against alcohol.

Someone issues warning about content in spirits, but its ok to drink beers cause its a lesser percentage.

End of the day go through enough of it you'll feel the same effects

As for the NSW thread, thats a race car remember. It would be a fair portion more sensitive to any slight changes like that. You wont see that gain on a road car IMO

I think it's pretty basic. Jap car engines are designed and stress tested using standard high grade jap fuels. If you start mixing your fuel then I say that there is the possibility of problems. It's proven this fuel burns at different temps for starters and IMO thats a good reason to stay clear of it untill it's proven....

Ethanol is ethanol, its there or it isnt.

If Nis Aust say 10% no good, then 5% ethanol... is what, just a "nothing" ?

A warning against Ethanol is just that, its like giving a warning against alcohol.

I'd like to see some proof of this statement. It seems to me your arguing that the amount of ethanol doesn't matter. Where did you get this information from?

The amount of ethanol does matter a great deal. If you don't beleive me put some Optimax Extreme in your car and run it for a year. Then put a 20% blend in and run it for a year. Trust me, you'll notice a difference.

Like I said, I have heard that even 10% is fine for most cars, and 5% will have no difference at all. I'll try to find some info that supports this, but in the meantime here is some basic information about ethanol so you won't be so scared of it. I know the media has run a pretty bad scare campaign but I 'm pretty sure you have nothing to be afraid of. :P

This is from the RAA:

Most metal components in fuel systems will corrode or rust in the presence of water. Ethanol increases petrol's ability to absorb water without separating and Ethanol blended petrol can therefore ‘hold’ more water and carry this through the engine. The greater the concentration of ethanol the greater the ability to ‘hold’ water.

Several studies have examined the effect of E10 on fuel tanks and fuel system components and have concluded that ethanol up to 10% does not increase corrosion in normal, everyday operation.

In older models, deposits in fuel tanks and fuel lines are occasionally loosened by E10, and the fuel filter may become plugged. This is remedied by a fuel filter change.

If very Ethanol rich fuel is used this may cause an engine to stall.

Laboratory tests have shown that blends of 20% pure Ethanol in petrol can damage some conventional automotive paint.

From the NRMA:

Research by NRMA and others has shown there are no technical combustion problems in using a 10 per cent ethanol-in-petrol blend in internal combustion-engined vehicles. However, some vehicle manufacturers have stated they will not maintain vehicle warranty coverage at ethanol content above 10 per cent.

Mor info from a report to the Department of the Prime Minister:

Almost all post-1986 vehicles can operate satisfactorily on E10. As was known when setting the fuel standard in 2003, E10 is not optimal for vehicles that have carburettors or mechanical fuel injectors, mainly pre-1986 vehicles.
The Taskforce considers that there is no reason to reduce the maximum ethanol limit in petrol from 10% to 5%.

Responsibility for consumer information about the fitness of fuel for its intended purpose rests mainly with fuel retailers and suppliers. In the light of that, the current fuel ethanol information standard could be simplified, primarily to require notification that the fuel contains ethanol at up to 10%.

Given that an even higher percentage of cars can use E5 than E10, the information standard for fuel ethanol could be further modified so that labelling is required only above 5% ethanol in petrol, rather than 1% as at present. As in Europe, this would give fuel companies flexibility to use up to 5% ethanol as a fuel extender or octane enhancer, without the costs of dispensing E5 as a separate blend.

And why people are so scared of it:

Consumer confidence was damaged significantly in 2002–2003 after reports of the distribution of high concentration (20–30%) ethanol blends around Sydney, and widely publicised allegations of vehicle damage. At the time, the Australian Automobile Association (AAA) and other consumer advocates became concerned about the potential operability and additional motoring costs associated with ethanol-blended fuels.

Ethanol_chapter_7.doc

Edited by shyster
Mor info from a report to the Department of the Prime Minister:

Perhaps you should go on to say that one of the main manufacturers/proponents of ethanol blended fuels has strong links to the Liberal party if not the PM himself. As an aside it's interesting to note that bio-diesel is to be differentially taxed to it's detriment compared with ethanol to the point that it is debatable whether the fledgling industry will survive......

In any event, Nissan has not stated that you can't use ethanol blended fuels, but that it is not recommended for vehicles manufactured before a certain date. The date is significant because it suggests production changes were made to accomodate such fuels. Personally, I'll take the word of the manufacturer for the time being, rather than un-attributed 'studies'. Show me some research into into the long term effects (if any) by a reputable, independent scientific organisation (eg CSIRO) and I'll consider using the stuff. But even then I would question the value for a street driven car in the (nominal) 2 points of RON rating to be gained (ie 100 RON as apposed to 98). I'd suggest the performance difference would be hardly noticable, if at all.

Edited by SteveL
Anyways, I'll wait a bit for the first test batch of lines to go through, if there are no dramas, then yeah, I'll start using it myself, if there are dead engines all over the joint, then obviously i'd refrain.

Peace.

Yeah... Peace and all that mate, but hang on a sec, I am having a little hard time of understanding you.

First you cream yourself over a 40 awkw gain on a race prepped GTR.

Than you dismiss the statement of Nissan Aus, saying it's only to cover their backside.

Finally you are betting your bottom dollar that there is no difference in between 03 and 05 Nissans.

So, why do you hesitate in using this fuel straight up...?

We (nay sayers) are not scared of ethanol per se, just cautious of the fact that Nissan does not recommend it. Why is it so, is the million dollar question. It might be as simple as to meet the emission requirements, or something that has more serious consequences.

Leaded race fuels have negative effects to your catalytic converters, O2 sensors, etc, but these effects are known and people (myself included) use it at their own risk. Same thing can not be said of ethanol. I don't care about what Peugeot or Citroen recommend, as i don't drive one.

Perhaps you should go on to say that one of the main manufacturers/proponents of ethanol blended fuels has strong links to the Liberal party if not the PM himself.

Personally, I'll take the word of the manufacturer for the time being, rather than un-attributed 'studies'.  Show me some research into into the long term effects (if any) by a reputable, independent scientific organisation (eg CSIRO) and I'll consider using the stuff.  But even then I would question the value for a street driven car in the (nominal) 2 points of RON rating to be gained (ie 100 RON as apposed to 98).  I'd suggest the performance difference would be hardly noticable, if at all.

My main argument was that there is a clear distinction between E5 and E10 fuel, as some people seemed to think they were the same thing, and had the same effects.

The report I quoted and attached was made for the PM's office, not by the PMs office. It was a report made by the Biofuels Taskforce. This taskforce includes:

* Dr Conall O'Connell, Deputy Secretary, Department of Environment and Heritage

* Dr David Brockway, Chief, Division of Energy Technology, CSIRO

* Dr John Keniry, Chairman Ridley Corporation Limited, and

* Mr Max Gillard, Vice President and Chief Operating Officer, Toyota Technical Centre, Asia Pacific Australia.

Also personally I would trust the NRMA, they are a motoring body, their sole prupose is to provide valuble information for motorists.

However I do agree with you that it would provide questionable value on a street driven car. In order to gain a performance bonus from using the fuel, you would have to get your car tuned on 100RON fuel. Which would mean you would have to use it exclusively, and there aren't currently enough servos that stock this fuel to make this feasible.

All I'm trying to do is correct some generalised and often incorrect statments made about ethanol blended fuels.

Edited by shyster

Noone said they were the same. Yes, there is a clear distinction and everyone would know it.

E5 is %95 gasoline and %5 ethanol.

E10 is %90 gasoline and %10 ethanol.

Nissan does not recommend the use of E10. Do you know where they stand in relation to E5...?

Nissan and pre 04 cars: my assumption goes with that crowd that believes that nissan wants to cover their ass, regardless of the facts about ethanol fuel. I'm sure nissan sold a lot of cars in 2004 THAT STILL HAVE THEIR NEW CAR WARRANTY. Think about it. I also doubt there will be any diff between a 04 and 05 maxima (for example). i'm pretty sure Nissan (and any car manufacturer for this matter) are liable for any damage which occured under the warranty, even if they claim it after the warranty has expired.

If ethanol does turn out to cause damage to our cars, nissan doesn't want to be held responsible.

on the 100 ron - yea, theory tells us that we gotta re-tune the car. I believe this to be true, but for all of us without engine management, (and this is confirmed by 2 extatic honda boy ricers), drain the battery/reset the ecu for gains. Timing resets and adjusts itself for fuel quality, timing may not retard as much and therefore gains.

All in all, i'll use the petrol in which my car drives the best. At the moment its BP ultimate, i'll try extreme when I get my license back, but by then they'll either have 100 octane at all servos and/or all fuel will have a healthy content of ethanol with no side effects, or there will be an additive out to protect fuel lines and stuff or it will be off the market because it destroys cars... or we will be all driving electric cars.

Nissan doesn't recommend the stuff, but it doesn't mean its bad, and what choice do we have regarding ethanol in fuel? are there any out there which don't contain it?

Noone said they were the same. Yes, there is a clear distinction and everyone would know it.

E5 is %95 gasoline and %5 ethanol.

E10 is %90 gasoline and %10 ethanol.

Nissan does not recommend the use of E10. Do you know where they stand in relation to E5...?

Read this:

The only actual statement I've heard from Nissan is that they don't recommend the use of E10 fuel. As far as I know they have no policy on E5 fuel and everything I've ever heard about E5 says its safe for just about any car, if not every car.

Ethanol is ethanol, its there or it isnt.

If Nis Aust say 10% no good, then 5% ethanol... is what, just a "nothing" ?

A warning against Ethanol is just that, its like giving a warning against alcohol.

Someone issues warning about content in spirits, but its ok to drink beers cause its a lesser percentage.

End of the day go through enough of it you'll feel the same effects

As you can see, not everyone knows the distinction.

As I said I cannot find anything from Nissan about E5. They may be being purposely ambigous. But then again they may not have had a chance to give their opinion on E5, as it has only been released recently. Their discouragement of E10 fuel is from March 2004, which is a couple of years after ethanol was first introduced in those amounts in fuel.

Edited by shyster

Suave,

For Nissan to not recommend ethanol blend in their pre 04 cars, one can only assume that, they made changes to production of their vehicles to accept ethanol blend from 04 onwards. That is as straight forward as they come.

Also, a heads up on all other fuels. They contain %0 ethanol.

Shyster,

So, you don't know Nissan's stance to E5.

FYI, someone on PF rang Nissan and this is what he had to say about it : "Just got off the phone to nissan, and they confirmed that NO nissan built prior to Jan 04 to use any blended ethanol fuel whether it be 5% or 10%."

Re the quoted text of R31Nismoid, I don't want to speak on his behalf, but i am certain you misunderstood it.

His analogy with alcohol simply states that you can get just as drunk with beer as you can with spirits. E5 contains half the amount ethanol compared to E10. So, does it mean it is not as harmful, or totally harmless..?

Cheers.

no emre... ALL manufacturers have given the same statement. And it isnt anything new. They have been "recommending" that ethanol fuels be used at your own risk for years.

and fair enough because in SOME cases there have been issues caused by higher percentages of ethanol being used. Also as you or someone else stated the cars after 04 have been tuned to run on ethanol... its nothing to with the fact that the engine has been redesigned to cope with it... i hardly think they would redesign the entire engine just because of people MAYBE using ethanol fuels.

Its MORE likely that all they are doing is incorporating it into their maps in the ECU, something the pre 04s more then likely dont have.

Obviously if you want to use it... simply tune your engine for it... ive been using 10% blend on the magna for months at a huge saving over normal petrol and had no issues whatsoever. So far done 5000ks on it... will do another 50k and im sure will have a similar report... no issues.

At the end of the day you dont have to use it...

Re the quoted text of R31Nismoid, I don't want to speak on his behalf, but i am certain you misunderstood it.

His analogy with alcohol simply states that you can get just as drunk with beer as you can with spirits. E5 contains half the amount ethanol compared to E10. So, does it mean it is not as harmful, or totally harmless..?

Cheers.

Yes it does, I have already explained this. Read my above posts, I don't like repeating myself.

Like I said the only stance Nissan has against ethanol is against E10. I can't exactly comment on something you apparently heard from some guy, and I'm not going to ring Nissan to find out for sure. I really don't care that much.

But if you read my posts you will see the point proven that most manufacturers are just being overly cautious in regards to ethanol, and that E10 will run just fine on most engines, and E5 is fine on almost any engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
×
×
  • Create New...