Jump to content
SAU Community

Recommended Posts

hey guys

im having a few dramas with my 180, with the wiring, so im thinking about ripping out the motor and putting in a 4.0l lexus quad cam v8 and run a twin turbo set up on it

i was going to rip out my rb25det and do a custom install on the v8, get a bellhousing adapptor and run a supra 5 speed adn then run a twin t70 setup and run 2 38mm wastegates, do fuel setup, fmic and exhaust

what do u guys think, im looking for the 8 as i think it will have more torque and have the potential to make more power

Link to comment
https://www.sau.com.au/forums/topic/96636-twin-turbo-v8-in-180sx/
Share on other sites

so tiny wiring problems which can be fixed by a new loom ($500-$800) is making you go to a non nissan V8 conversion?

good son of rajab. Hope you have a good 15k sitting around as its not going to be cheap. Torque of a v8 is hardly what a 180 is designed for, let alont a TT one...

god i love peoples enthusiasm for conversions, zoom magazine is a contributing factor, and makes everyone thinks 8 secs is only a stock v8 and a set of twin turbos away, trust me theres plenty more than that, and 99% of the conversions like that done in magazines etc are done by mechanics/fabricators/or people in the trade.

labour and parts would be a killer, and its not bolt in lets race, its make this, fabricate that, etc etc, wiring issues.

id say a lexus v8 with stock internals and compression wouldn't last all that long with a set of t70 turbos and running 8's, so plan for a rebuild in the near future too, then its more bucks $$$ :O

but if you install this motor... will you still have the same wiring problem?

also with that much power and tourqe... are you even gonna be able to drive it? eg 1/4 times will be hard, too much wheel spin.. but to fix it youll have mass tyres... unless you gonna have it not overly massive power... which wouldnt be worth it if you can get the same power from your rb25det...

yea?

not to be rude or nothing...but ill say it straight rather then beating around like everyone else. it sounds like a wank and i am a trady, with a family full of mechs and engineers and i probably wouldnt bother with such a large hassle..even minus the labour it would be expensive and time consuming. Just thinking about it, almost everything involved would be custom, even moreso if its a toyota motor. you might have half a chance with the infiniti v8.

engine mounts, gearbox mounts, tailshafts, diff, manifolds and exhausts (will it all fit, high mounts or some superwide mounted turbo setup to suit a t70 as they arent exactly a small turbo. engine is already super wide from V config of engine) I was gonna suggest running turbos up front, as ive seen that in some drag and race cars...but you would need a clutch fan, and a big ass radiator to cool the thing as a twin turbod v8 would run rather hot.

thats just the start of the list off the top of my head in the last min. But it sounds like a great idea mate....Just a side note..How much for the rb25 and gearbox mate? I need em for my race car.

Cheerio.

hey guys

im having a few dramas with my 180, with the wiring, so im thinking about ripping out the motor and putting in a 4.0l lexus quad cam v8 and run a twin turbo set up on it

i was going to rip out my rb25det and do a custom install on the v8, get a bellhousing adapptor and run a supra 5 speed adn then run a twin t70 setup and run 2 38mm wastegates, do fuel setup, fmic and exhaust

:) what do u guys think, im looking for the 8 as i think it will have more torque and have the potential to make more power

Twin T70 setup? you have to be f**king kidding right.

I seriously hope you wouldnt commit to spending that much on TT V8 conversion only to run two cheap and terrible eBay special turbos on it.

:)

well then....

there is already a 180 with this set up on it... fairly decent fit.. as for the suggestion of the vh45, that is an even bugger motor,, i have seen it done on a s13 and it sticks out the bonnet... and yes i khnow theres more that 2 turbo's to a 9 second car and i know all the headaches cause ive done conversions before

well then....

there is already a 180 with this set up on it... fairly decent fit.. as for the suggestion of the vh45, that is an even bugger motor,, i have seen it done on a s13 and it sticks out the bonnet... and yes i khnow theres more that 2 turbo's to a 9 second car and i know all the headaches cause ive done conversions before

go for it then, would love to see the result! hehe!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...