Jump to content
SAU Community

Recommended Posts

My new toy, R32 GTSt, is having some teething problems. My HICAS light comes on, and my ABS Light comes on, both intermittently.

Does anyone know how to manually enter diagnostic mode?

Does any one know where I can aquire a technical service manual? (Prefer free?)

Does anyone know how I can get rid of HICAS? I don;t like it.

Any help, or links to downloadable documentation, or advice would be GREATLY appreciated, both by me and my toy!!!

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/
Share on other sites

Probably check meggala's site.

At $500 for a translation of the workshop manual, I don't like your chances of a freebie.

For the HICAS light, check the reservoir, which is behind a panel in the boot, beside RH tail lamp assembly. Check the fluid level with ignition ON. Top up with standard auto-trans fluid. Also, check for anywhere where things earth to the chassis. Nissans are notorious for needing pure voltage.

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20371
Share on other sites

BOOSTMEISTER: Trial you say... funny it's got a Trial sticker on the boot... They a tuning shop in Japan??

MODS:

Big S/S Exhaust with large straight through glass pack muffler.

Big Trust FMIC with GReddy Plumbing

Blitz BOV

HKS Filter (Soon to make way for big K&N)

H/D Clutch

Adjustable coilovers (Unknown brand)

Blitz Dual Street Spec Boost Controller

17x8 Front - Still undecided on tyre size

17x9 Rear - "

Full genuine GTR Body kit including Aluminium Guanrds and bonnet

PLANS:

T3/4 Hybrid

Fully Programable ECU with Anti-Lag

RB25/30 Hybrid

Pinapple Diff Mounts

..... more just can't think!!

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20421
Share on other sites

You R32 guys are going to love me listen carefully :D

In the boot the hicas computer can be found under the rear parcel shelf.

The hicas computer (silver rectangle) has 2 cables plugged in a bigger one and a smalller one.

Unplug the smaller cable and leave the bigger one plugged in.

You have now diasbled the HICAS with no side effects.

:P

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20487
Share on other sites

Kabab, True this does disable the HICAs Computer, but then don't the wheels turn under load or anyother side effect?

XrSiSt, how do I get my Red Devils Member logo thingy at the bottom of my posts, Red Rocks!!!

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20494
Share on other sites

Originally posted by D-Masta

XrSiSt, how do I get my Red Devils Member logo thingy at the bottom of my posts, Red Rocks!!!

YAY! Another member for us! :P

D-Masta, just copy n' paste this into your sig...

[ color=red]Member of the Red Devils[/color ]

but delete the gaps in the brackets :D

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20677
Share on other sites

Thanks for that Shell, do you have a list of all Red Devil Members?

Kabab, cheers mate I'll be trying that on wednesday when I get my car back from pedders. Getting all bushes and adustable camber fitted to rear of my car, and adjustable castor to the front.

Also fitting solid mount urethane diff cradle bushes at the sam time.... Can't wait to feel the difference, the car feels so unresponsive in handling compared to my old 180sx.

Link to comment
https://www.sau.com.au/forums/topic/967-help-please/#findComment-20686
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...