Jump to content
SAU Community

Recommended Posts

holy hell :) ! so there are now two gtrs in the 7s? nice. this was the same guy who ran a 8.033 last week wasnt it?

Yep the same driver and car. I started a new thread because the other one was for his previous 8sec run.

  • 3 weeks later...
  • 4 weeks later...

These stats taken from 10 list in HPI GT-R Special #5 (this is a few months old)

1.HKS R33 GT-R - [email protected]

2.Avance Japan R32 GT-R - 8.11@171MPH

3.Croydons R33 GT-R - 8.27@167MPH

and so on...

So this makes Reece the driver of the second quickest GT-R in the world? Only behind HKS... That is astounding :domokun:

I'm not aware of any videos of that run yet ;) I've been waiting for one to show up. I know it was with a 1.42s 60ft, so theres more in it - the car has run quicker 60fts.

Heat Treatments have run another 7.9 since this post, not sure what trap speed - and GDS (Glen Suckling) have run in the 8.0-8.1s, but not quite cracked into the 7s. The NZ 4 and Rotary nationals are this weekend coming, I suspect there might be some more news after then :O

I'm not aware of any videos of that run yet :)  I've been waiting for one to show up.  I know it was with a 1.42s 60ft, so theres more in it - the car has run quicker 60fts.

Heat Treatments have run another 7.9 since this post, not sure what trap speed - and GDS (Glen Suckling) have run in the 8.0-8.1s, but not quite cracked into the 7s.  The NZ 4 and Rotary nationals are this weekend coming, I suspect there might be some more news after then :)

r there any pic or articles on reces car anywhere???

  • 3 weeks later...

The Speedtech EVO (aka DOCILE) ran an 8.23 @ 179.5mph this weekend here in NZ, I'm waiting to see if there are any videos circulating of that run - if so I will link it up.

The fastest run I am aware of being caught on camera so far of his is an 8.35 @ 174mph run that was done a couple of weekends ago:

http://www.pizzaboy.orcon.net.nz/dragvids/docile_835.wmv

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...