Jump to content
SAU Community

Recommended Posts

Its that time people. Time for a good full car service.

I purchased my car about a month ago and i have decided to give it a good service.

Its a S1 1993 R33 Skyline. I dont know what kinda oil i should be using, because my last car was an (NA R33).

The main oils i will need are:

Engine Oil, Gearbox Oil, Diff Oil. (stock diff, not LSD.)

)))))))))))________________________________________(((((((((((

What does everyone use on their babies?

Link to comment
https://www.sau.com.au/forums/topic/97155-the-right-oil/
Share on other sites

If it is a GTST then I think they all have LSDs right??

Im interested to know what oil is best at a n affordable price.

I would be interested to know if its an LSD as well. My mechanic said he think its just a normal diff. Give us your thoughts people.

Link to comment
https://www.sau.com.au/forums/topic/97155-the-right-oil/#findComment-1764488
Share on other sites

for engine oil its probably a personal choice thing i use Fuchs Titan 10W-30

but for gearbox and diff the only way to go is Redline Oil its not cheap but absolutely great stuff

yet at the same time it doesnt REALLY matter what brand of oil just as long as its the right type and weight

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/97155-the-right-oil/#findComment-1777210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...