Jump to content
SAU Community

3076R .63 Vs 3071 .82


Mr. Pav
 Share

Recommended Posts

hey guys sold my s15 and switched to a 33 pooline for a cheap bitumen sprints car/local drift car. Chasing 270-280 skrillas on 18 or so psi. Rb25 all supporting mods with an unopened engine. I've researched as much as I could but haven't found a good comparison on whether the lag would be less on the .82 71 but achieve the same power. Already have a 44mm t smart gate welded onto stock mani FYI.

Up here in nth qld its hot as shit to and we don't seem to have on par figures with some.of the rest granted. Just seeing what people think. I'm leaning towards the 3076 in .63. Tracks are small so response is needed. Cheers

Link to comment
Share on other sites

Get a 71GTX mate, regardless of what housing you run. Near enough GT76 flow, near enough or the same as GT71 spool.

Am running a GTX71 on my SR and cannot fault it. It makes 295wasps on a DD running 98 ron and it is by far the best turbo all round that I have had, period.

My personal recommendation: get a GTX3071R core without housing and a Kando 10cm T3 Vband housing. Kick ass and take names.

Link to comment
Share on other sites

I like the idea of Scottys external gates mounted on the turbine housing . IW will work with a 0.82 Garrett housing and either a GT3076R or GTX3071R . People say the GTX3071 is a tad less responsive than a GT3076R and a mid trim 76R should be slightly better responding than the usual larger comp trim version .

Any of these turbos should romp in 270-280 at the bags its just that some will give slightly better transients than others .

Take your pick , cheers A .

Link to comment
Share on other sites

I like the idea of Scottys external gates mounted on the turbine housing . IW will work with a 0.82 Garrett housing and either a GT3076R or GTX3071R . People say the GTX3071 is a tad less responsive than a GT3076R and a mid trim 76R should be slightly better responding than the usual larger comp trim version .

Any of these turbos should romp in 270-280 at the bags its just that some will give slightly better transients than others .

Take your pick , cheers A .

Interesting feedback re GTX3071 vs GT3076, who exactly said this?

I believe Mick_O was the fabled GTX response king around these parts, never had I heard anyone say his car was less responsive than an equivalent GT3076....

Furthermore, I can confirm that I've driven a bunch of 3076 powered SRs and none compare to the response I am getting from my GTX3071. None of those 76s were twin scroll but neither is mine. Apples and apples.

First hand experience > folklore, wouldn't you say?

Link to comment
Share on other sites

The GTX3071 felt like the open GT3082 for transient response on 98ron IMO (ie bum dyno). The GT3076 felt better everywhere to me but it was TS so this may or may not have a noticeable effect. Mick's GTX was totally awesome on E85 and better than the GT3076 on 98ron.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • A creative mounting location would be from the roof. We totally need to bring back ludicrous stereo designs from AutoSalon days...
    • don't do. Fricken typos. Make me look like the sheeple.
    • I could show you guys photos of wrap having been removed properly, and where the wrap was removed, paint underneath is perfect. Sections of the vehicle didn't have wrap on it, and in those areas, the paint work is destroyed because of how long it had been sitting in the hot QLD sun for many many many years. Wrap even still looked decent. Good quality wrap, and removing it properly shouldn't rip off the paint work, unless the paintwork was already shot to pieces before hand.
    • Any write ups on replacing the window motor?  I've never messed with them (or window regulators) before.   Ever since I've had the car, the driver window would roll down just fine, but most often I'd have the try a few times to get it to go up.  As soon as it started to go up, it always goes up smoothly and quietly.  Seemed like a bad switch.  But now, its stuck in the fully down position and won't come back up.  I get =12/-12V coming out of the relay/amp when pressing the switch up/down.  So the switch and amp are working.  Just a bad motor.  I've also applied 12V directly to the motor and nada.   Any help on replacing the motor?  Can the glass and regulator stay in, and only replace the motor?  Or not possible?  Thanks!!!
×
×
  • Create New...