zebra

Need a relay, I run mine straight from the battery into the relay ( I used 2 relays for 2 pumps) than use the original wiring from the factory pump to trigger the relays. otherwise the pump will be on all the time.

Sponsored!!@!@!@!!!! YYYYYYYYYYYYYEEEEEEEEEEAAAAAAAAAAAAAAHHHHHHHHHHHHH

Very nice!! Love how thorough you have been with everything Black on Black 32s are just simply awesome!!@

Oh and Roy, I still maybe keen for that JBT setup, but might be a while, got a million other things to do first lol.

I hope the dog bones turn out well, Will watch with intrest as to what they are like on track, heard many stories both good and bad.

Try Hi tech Exhausts. Not hard to make a good flowing quiet 3.5 or even 4" exhaust

What year did it win Bris? I dont like this game lol

Rich - Steal me one of those JZs next time you are there!!! Who ever gets this will get a bargain!!!

Just thought of some more, 3" Mild Steel Cat Back Exhaust Suits R33 2 Door, Single Oval Muffler at the rear, Ok Condition, Cat is welded to the pipe, but the insides have fallen out, The muffler is around 18 -24 months old, the rest is around 4-5years. - $50, please note the exhaust is in Goulburn NSW would prefer pick up from there. Used Rb30 Oil Pump, No idea on condition, came out of an RB25/30 which munched the bearings - $20 plus post 5 Rb25det factory Conrods and 6 ACL Race series Forged Pistons, The 5 rods are usable and 3 maybe 4 pistons are. Pistons are 86.5mm and 8.5:1 Comp. - $50 for the lot Turbo Smart Boost Tee - Not very old, Came with the Soarer I bought - $50 posted.

Guys Im cleaning out my Garage's So offloading all the un-needed bits cheap Item #1 - R33 RB25DET Block, Needs a Rebore, comes with Girdle, but no bolts or accesories - $50 pick up only from South Canberra. Item #2 - Rb25DET Crank Shaft Standard size journels, micro polished - $100 pick up only Item #3 - Rb25DET Crank, Needs grinding, already done 10thou on mains and 25thou on Rod journals - $40 Pick up Item #4 used Stainless High mount t3 manifold, used for a few months, suit 38mm 2 bolt Tial Gate, No cracks - $75 + post #5 - 38mm Tial Copy gate used for a few months $50 plus post #6 - RB25det factory Upper Plenum, No throttle body or gasket - $40 plus post #7 - Standard AFM, Still works but a bit sad looking, good for a spare - $20 plus post. There is heaps more to come Ill get photos ASAP Best to contact me via PM or reply here. Thanks Andrew

Could just buy an rb20 r32 actuator? getting a little hard to find these days, I Think I have one in storage lol

Sierra?

fill the thing to the brim with oil and then wrap it

r32 actuator is 10psi, rb25 uses the solenoid to go from 5psi below 4500rpm to 7psi above that

lulz....dont read the thread or anything.

Standard turbo? If so then yes, about 5psi is all you will get running straight off the actuator.

most of the CAPA Vortech supercharger kits run the ole plastic Bosche valve, you would prob need 2 with a positive displacement blower though, KKR do an alloy version of it too, and it comes with 3 different springs. both are 25mm inlet and outlet. hence my suggestion of using 2 of the buggers.

I agree, I wonder how many people are sitting at home shaking their heads and saying it cant be true.

If the turbo has the proper 4" port shrouded intake than I would run with a 4" intake pipe

From what I have seen T04Z's need a fair whack of boost to make power...pump 2Bar into it!

That is a bargin for front and rears!

its easy, GT3076 with a .82 internal Gate housing, The guys at GCG will know what you mean by the "big can actuator"

LOL WTF! Try the fuel pump direct re-wire...its in the DIY section

On the GCG website, they are now selling the HKS turbine housings for the GT30 based turbos, so maybe have a look into that too.

I do, lol