Jump to content
SAU Community

MBS206

Members
 View Profile  See their activity

  • Posts

    22,619

  • Joined

  • Last visited

  • Days Won

    55

  • Feedback

    100%

 Content Type 

Everything posted by MBS206

  1. MBS206
    I've seen so many photos of the "feelers" reaching form the ground to the sky. And the amount of energy formed in the lightening causes the air to turn to plasma, it is this plasma path that the lightening strike follows as electricity can't actually jump through air (You get a plasma trail first)
  2. MBS206
    Why couldn't this come up when I had a touch more money?
  3. MBS206
    I've never heard any clutch make any noise whilst fully engaged. If it's slipping, it'll make noise. But once engaged, there's really no moving parts in relation from clutch to flywheel.
  4. MBS206
    Price yet?
  5. MBS206
    Beer Barron. If I'm membered by then, am I still able to come? I've been told I should come along by another member
  6. MBS206
    And then you can sleep in the other half still!
  7. MBS206
    Either map sensor or brake booster.
  8. MBS206
    I'm pretty sure you can since it's not an SAU event, and even SAU don't mind either
  9. MBS206
    a gasket most likely.
  10. MBS206
    AWD
  11. MBS206
    f**k the cannon off That'll cut the noise straight away I went from a massive cannon to a proper muffler on the rear with twin tips (High flow) No change in power, much quieter, no drone
  12. MBS206
    Check for leaking injectors. If the engine won't crank, you could have a cylinder full of fuel, and not enough power to compress it. Pull all of your plugs and check.
  13. MBS206
    Therefore fuel pump most likely isn't going When you turn from ACC to IGN, (ON) can you hear the fuel pump whir for around 3 seconds? Most likely a fuse somewhere, or relay.
  14. MBS206
    Sounds like vac leak to me.
  15. MBS206
    Most places I've spoken to, and sized up, have managed to work out the correct inj size, and they don't like to run over 80% DC at all! They leave 20% for spiking etc, and for other necesities, and since using up to 80%, it makes it easier to tune (Rather then a car that only uses say 40%)
  16. MBS206
    SCHWEET... Brake job anyone?
  17. MBS206
    And most likely, my ECU is stock, and you'll have a graph like I got, where you go back to basically where you started in terms of torque, so why bother...
  18. MBS206
    I'll be there, But, my question is, will there be an oppurtunity for me to say, skip over to a dry patch on the edge and destroy what's left of my old tyres if I have my new ones by then?
  19. MBS206
    sounds like it's mis firing, or is it only sound?
  20. MBS206
    Supposedly it's pretty much well been changed from what I've been told. And the timing was already sitting where it was meant to be supposedly. Ah well, hopefully this weekend I can throw the full aftermarket ECU in, depending when I get it delivered. Then I'll keep all posted on the power and progress.
  21. MBS206
    It hits 24degree ign timing on the map on consult. No 8 or 9 degrees. I'll get them and download. When it hits the 24 degrees ign timing, it pings on the dyno (And road) and retards out, but not via the map.
  22. MBS206
    line to the actuator split?
  23. MBS206
    Where are you located?
  24. MBS206
    Is that for when you can't operate the door key?
  25. MBS206
    It's not hard, just a touch time consuming.
×
×
  • Create New...