Jump to content
SAU Community

zei20l

Members
  • Posts

    5,724
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by zei20l

  1. just top it up with matic J/S or nulon synthetic
  2. error playing video...........
  3. flat spots? lol unless the car is sitting there for a few months, they wont flat spot. is be checking other things like bushes and wheel bearings.
  4. 1. remove seats 2. remove switch from seat 3. disassemble switch and clean. do reverse of above its not that hard, be VERY careful as the leather seats weigh a ton. and watch out as the switches may pop open when you crack open the switch box
  5. if you lock the transfer case via the button, then move forward around a corner, i THINK it will still give you front torque. i dont have the gauge, but i can feel it in the front wheels
  6. i think its to prevent understeer.........
  7. had 2 S15s. awesome cars!
  8. you can get H1 HID conversion kits. but you can just put D2Rs into your current headlights. even if you use an aftermarket ballast unit. anyway, take a photo first and we can probably tell whats in your car
  9. from factory they are a D2R HID burner. with compliance they must be removed and they retro fit an H1 into the D2R socket. it just depends if your car has been complied 'correctly' take a photo of the headight so we can see the globe. take it from the front of the car looking into the glass. probably side on a bit
  10. if its been complied 'correctly' its an H1 if it still has the HIDs its a D2R 4300k. generually you should replace both HIDs at the same time due to colour difference as they get older. or go on ebay and get a set of chinese HID burners for about $40 delivered.
  11. dont forget there is a crank angle sensor at the bottom of the engine where it bolts to the transmission............. that may be causing you grief
  12. remove front drive shaft, purchase Z33 manual transmission there you go! RWD manual turbo nissan.
  13. lol was that really a rock climber?? who puts a rotory into something that needs a boat load of low-down torque?? was waiting for it to roll over also!!
  14. the springs are the same, its the front lower mount that is different between the two
  15. did anyone spot me up in maitland on the weekend?? plenty of people checked out the car, especially in maccas where there were 983958723548248969584509685734286 commodores in the carpark
  16. ahhh i wasnt sure, we didnt want to take any risks with our highly defectable volvo station wagons lol was there for maybe 45 mins. didnt see you there, and i realised i dont have your number either!
  17. its all good, dont think you missed out on much. we left when the big wheeler didnt roll over when it didnt go over the commo, and then the police turned up
  18. it wasnt a stagea, but i saw a WRX that was disrespecting the Nismo image with the nimso stripes he had on the car!
  19. might be a typo, RE4R01A got that from an auction on IM
  20. ok ill probably get there around 8 tonight. traffic will be crap all the way there im sure!
  21. i have a complete working factory navi with screen, DVD ROM (for maps not video), tv tuner and all wiring. also have the rear windows with the antennas in it. the good thing is, its from an RX, so its the right colour for your car!
  22. the item will be tested in-house in an un-disclosed suburb in sydney
  23. actually the suspension has slowly been stiffened, and she hasnt commented yet lol she knows the exhaust has been done, it rattles the garage door. and front door. and all the windows
×
×
  • Create New...