Willis

Thanks for the reply mate. After pestering every skyline owner I knew to check on their own cars, I've found that in all manuals the plug is "spare" and in an automatic the plug has a home..

You might get a buyer for 3k, it could take awhile to sell though.

RB20DET throttle body RB20/25/26/30 flywheel RB20DET starter motor 32 GTS-t indicators pair 32 GTS-t wiper motor RB20/S1 RB25 AFM RB20DET engine mount brackets (don't need the engine mounts) I need a cheap front mount intercooler setup for a 32. Prefer quality core! Will also buy just a core! I need an exhaust to suit a 4 door, a 2 door exhaust will work. Interested in a titanium catback also <3

Continued my search today with little to no avail. Started continuity testing the "Unidentified plug" and found 3 wires all seem to head to the heater box / climate control system. The thick black wire heads to the blue fuse box? And a green wire with yellow strip also heads to the same blue fuse box. As pictured; I was wondering if there is some kind of climate control / heater controller or junction box that this plug would normally go into?

Could you take a photo of the plug on that loom for me? Thanks.

I've been told the green one's are relay's. Easy done. The white one though is still a mystery. It's on the body loom. What i'm trying to say is the engine bay loom has no plug for this!

Not sure if it has a spoiler controller. What do you mean it will be that plug and 5-6 others around the headlights? What about the 5-6 other plugs? I will have more of a look on the right side, already had a quick squizz. It's also not in the rest of my body loom that goes to the headlights etc..

These retail for $1200-1500 shipped to Australia mate. RHDJapan is down right now, I was going to link it. Zero-1 is Cusco's entry level coil over.

I have a project 1991 hcr32 4 door that needs a ecu and engine bay loom. I've purchased a r32 manual gts-t ecu and engine wiring harness. Went down to the car today to start nutting it out and making sure it's going to work when i ran into this problem.. After connecting every connector i'm left with the 2 green plugs from the engine loom, and a long white plug from the body side of the loom (the one i'm pointing to in the images).. Anyone have any idea's? What the plugs are? What they do? I must be missing something obvious? Thanks, i've also searched and looked at images of loom's on google.. Willis

Bump!

RB20DET throttle body RB20/25/26/30 flywheel RB20DET starter motor 32 GTS-t indicators pair 32 GTS-t wiper motor RB20/S1 RB25 AFM RB20DET engine mount brackets (don't need the engine mounts) RB20DET air box

Still hunting for the above! Cheers.

PM sent, thanks mate!

message sent, thanks

Hi there i'm chasing some oem parts for my skyline project. Location SYDNEY NSW Looking for the following; RB20DET throttle body RB20/25/26/30 flywheel RB20DET starter motor 32 GTS-t indicators pair 32 GTS-t wiper motor RB20/S1 RB25 AFM RB20DET engine mount brackets (don't need the engine mounts) RB20DET air box If you have any of the following please throw me a PM with a picture, price and location! Thanks Willis

Found one! Thanks guys. Admin please close thread, cheers. Willis

Hi all, I'm looking for a RB20Det. Located in Sydney. It would be best if i could see the engine running, if already removed i would require compression test results. Would also be interested in a package with ECU and RB20 engine loom. If you know anyone with an engine sitting around in their garage, let them know. Cheers Willis 0435 120 602, SMS works best.

Bump ^^_

R32 GTR N1 Headlights, Immaculate - SOLD

Engine - SOLD Gearbox - SOLD Radiator + Shroud - SOLD Front Bar - SOLD

LH + RH Guards in average condition (Gunmetal Grey)- SOLD

Bump!

RB20DET Engine (no turbo, no coilpacks, no power steering pump, no aircon compressor and no starter motor) comp test 130 PSI across cold, removed for RB25 conversion. - PRICE DROP $400 RB20DET Gearbox (average condition, second gear synchro is pretty shot it's fine when rev matching though.. gearbox whine in 1st and 2nd gear's) removed for RB25 conversion, includes RB20 Clutch Slave - PRICE DROP $100 RB20DET Driveshaft (good condition) removed for RB25 conversion - PRICE DROP $50 RB20DET / 25 S1 Throttle Position Sensor - PRICE DROP $20 RB20DET Radiator + Shroud - No leaks, no corrosion, removed for Aluminium Radiator Upgrade - PRICE DROP $60 RB20 Clutch Master Cylinder - PRICE DROP $20 RB20 Clutch Slave Cylinder - PRICE DROP $10 Exterior; Front bar as pictured (pretty average condition, would suit drift pig) - PRICE DROP $20 LH + RH Doors (Gunmetal Grey), average condition, includes windows and everything else found in the door, includes door skins - PRICE DROP $100 FOR BOTH! LH + RH Guards in average condition (Gunmetal Grey)- SOLD PENDING PAYMENT AND PICKUP R32 GTR N1 STYLE Headlights (can't confirm if genuine), Immaculate - PRICE DROP $200 pair Exhaust; RB26 FRONT PIPES (twin 2.5" inlets to 3" rear) contact damage with ground - PRICE DROP - $FREE Suspension; HCR32 OEM Camber Arms - PRICE DROP $20 HCR32 OEM Castor Arms - PRICE DROP $50 Driftworks HICAS Lockout Kit, BYO bolt's etc - PRICE DROP $100 Interior; Skyline Door Trims (kick panels), both in good condition - PRICE DROP $10 pair Sparco Pedals + OEM Pedal Box's, Clutch, Accelerator and Brake - PRICE DROP $60 R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - PRICE DROP $250 R32 Ash Tray - PRICE DROP $20 Apexi Pen Turbo Timer - PRICE DROP $40 Drift Button GK TECH - PRICE DROP $5 Wheels; Work VS-MX 17 x 8 +22 and 17 x 9 +22 pcd 5x114.3 & 4x114.3 17 x 8 +22. No buckles, wheels have rash as pictured. These are genuine 3 piece items, i bought them with the intention to rebuild with larger lips. The front's require spacers to clear 32 GTR brakes. The 8's come wrapped in 205/40r17 as pictured. The rears are in similar condition, have more dish and no tyres. - PRICE DROP $1000 ono Rays Gram Lights 17 x 9.5 + 36 PAIR ONLY(tyres are dead) - PRICE DROP $350 Random parts; R32 GTR Resistor Pack (to run 32 GTR Injectors on a RB20) homemade - PRICE DROP $30 SCA Engine Crane as new! used once then stored in garage! - PRICE DROP $200 K&N Intake Pod Filters suit RB26 - PRICE DROP $30 S13 / 180SX SR20 Oil feed hardline, not leaking bought as a fix for my old leaking one - PRICE DROP $20 Feel free to make any offers, want this stuff gone! Willis.

Kosei 17 x 8 +38 and 17 x 9 +38 wrapped in 235/45r17 & 255/40r17 Bridgestone Adrenaline's (tyres are down to wear markers, camber worn, wheels have rash, structurally sound) - SOLD

Prices are negotiable, please make an offer!