Jump to content
SAU Community

Recommended Posts

^^ what he said...

also if you use a genuine GTR bar, if you use a genuine GTR bumper support (ie reo) you won't have to bend anything in the front, just the sides so they meet up witht he guards. The most common thing you see with R32 GTR bumpers on GTSt's is the 1cm or so gap under the headlights where the bumper bends.

You can avoid that by using a genuine GTR bumper support.

By "bumper support" your talking about the actual metal bumper or re-bar right?

Not to hijack this thread(and funky + 2 G U UP are right,by the way!),where is the best place to look for NEW Nissan body bits(R32 GT-R,if it matters)? Japan? Or does someone reputable bring in/order in stuff here? My car is dead straight,but a project looms...

Four months ago I bought a new R32 GTR bar from Mr Nissan for $519.00

Front bar vents are around $200 each. Yes, each. :P

Nismo sideskirts (the 1/3 OEM) are just over $400 each. Yes, each. :)

Suddenly fibreglass bits sounded a lot more appealing.

Four months ago I bought a new R32 GTR bar from Mr Nissan for $519.00

That's not as shocking as I expected...

Mr Nissan as in the USA fella,not Nissan Oz,yes? I've got a V Spec' II 32,so the front bar has the extra vents etc...I'd assume Nissan Oz,not bringing this model in,wouldn't want to have anything to do with it. Has anyone found a Nissan dealer in Oz that'll get new bits from Japan for their import that isn't a locally bought in model?

And,back on thread,most GTS-T's seem to have that dreaded gap on the sides,but I've seen the things fitted successfully,so it can be done...Once again,listen to funkymonkey and 2GU UP-they're onto it re:that GTR bumper support. :P

Mr Nissan as in the USA fella,not Nissan Oz,yes? I've got a V Spec' II 32,so the front bar has the extra vents etc...I'd assume Nissan Oz,not bringing this model in,wouldn't want to have anything to do with it. Has anyone found a Nissan dealer in Oz that'll get new bits from Japan for their import that isn't a locally bought in model?

And,back on thread,most GTS-T's seem to have that dreaded gap on the sides,but I've seen the things fitted successfully,so it can be done...Once again,listen to funkymonkey and 2GU UP-they're onto it re:that GTR bumper support. :P

Yes Nissan OZ

They all can get import stuff now.

Oh and Nissan Oz not bringing this model in... bollocks. My build plate says "Nissan Australia Motor Company"...

Brighton Nissan (Melb)

Blackburn Nissan (Melb)

they can both help you.

Suddenly fibreglass bits sounded a lot more appealing.

At double the life, flexibility, lack of cracking, lack of getting stress cracks.. and I *think* the nissan genuine's come pre-painted in your cars colour (not exactly sure on that though).. I'd pay double for plastic. I had fibreglass front bar(s) on my old car, and no end of destroyings for 2 bars.

Never mind asking a real panel beater what they think of the quality and the stuffing around to fit the fibreglass units. Many of them don't even come out of the mould properly..with heaps of small imperfections which need to be tidied up before fitting.

My current factory plastic bar has quite a few scrapes, but that would have been well destroyed by now if it was fibre.

Yes Nissan OZ

They all can get import stuff now.

Oh and Nissan Oz not bringing this model in... bollocks. My build plate says "Nissan Australia Motor Company"...

Brighton Nissan (Melb)

Blackburn Nissan (Melb)

they can both help you.

Thankyou sir! You've been a huge help,seriously!

And to those that endevour to get said GT-R bar fitted to their GTS',good luck-it sounds and appears quite doable!

At double the life, flexibility, lack of cracking, lack of getting stress cracks.. and I *think* the nissan genuine's come pre-painted in your cars colour (not exactly sure on that though).. I'd pay double for plastic. I had fibreglass front bar(s) on my old car, and no end of destroyings for 2 bars. 

$519.00 for a front bar is unpainted and not primed. That price was after a lot of haggling and the painter using a few favours. Nissan first stated the retail was just over $700 for the genuine bar.

I agree with you re: cracking etc. which is why I bought a plastic OEM front bar. I am happy with fibreglass Nismo skirts, vents and rear lip though because they'll never flex. The skirts, possibly, but no dramas so far and they're only small.

The cost for fibreglass was around $500 for those three components yet it would have been around $1600 from Nissan for plastic.

Personal preference of course, but I saved where I thought I could.

Cheers Gordon,

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...