Jump to content
SAU Community

Gtr Front Bar On Gtst

neo32

By neo32,
in Exterior & Interior Styling

 Share

Recommended Posts

sidewazegtst Collaborator

sidewazegtst

Posted
Posted
^^ what he said...

also if you use a genuine GTR bar, if you use a genuine GTR bumper support (ie reo) you won't have to bend anything in the front, just the sides so they meet up witht he guards. The most common thing you see with R32 GTR bumpers on GTSt's is the 1cm or so gap under the headlights where the bumper bends.

You can avoid that by using a genuine GTR bumper support.

By "bumper support" your talking about the actual metal bumper or re-bar right?

LTSJayce Veteran

LTSJayce

Posted
Posted

Not to hijack this thread(and funky + 2 G U UP are right,by the way!),where is the best place to look for NEW Nissan body bits(R32 GT-R,if it matters)? Japan? Or does someone reputable bring in/order in stuff here? My car is dead straight,but a project looms...

cowie165 Veteran

cowie165

Posted
Posted

Four months ago I bought a new R32 GTR bar from Mr Nissan for $519.00

Front bar vents are around $200 each. Yes, each. :P

Nismo sideskirts (the 1/3 OEM) are just over $400 each. Yes, each. :)

Suddenly fibreglass bits sounded a lot more appealing.

LTSJayce Veteran

LTSJayce

Posted
Posted
Four months ago I bought a new R32 GTR bar from Mr Nissan for $519.00

That's not as shocking as I expected...

Mr Nissan as in the USA fella,not Nissan Oz,yes? I've got a V Spec' II 32,so the front bar has the extra vents etc...I'd assume Nissan Oz,not bringing this model in,wouldn't want to have anything to do with it. Has anyone found a Nissan dealer in Oz that'll get new bits from Japan for their import that isn't a locally bought in model?

And,back on thread,most GTS-T's seem to have that dreaded gap on the sides,but I've seen the things fitted successfully,so it can be done...Once again,listen to funkymonkey and 2GU UP-they're onto it re:that GTR bumper support. :P

Ronin 09 Grand Master

Ronin 09

Posted
Posted
Mr Nissan as in the USA fella,not Nissan Oz,yes? I've got a V Spec' II 32,so the front bar has the extra vents etc...I'd assume Nissan Oz,not bringing this model in,wouldn't want to have anything to do with it. Has anyone found a Nissan dealer in Oz that'll get new bits from Japan for their import that isn't a locally bought in model?

And,back on thread,most GTS-T's seem to have that dreaded gap on the sides,but I've seen the things fitted successfully,so it can be done...Once again,listen to funkymonkey and 2GU UP-they're onto it re:that GTR bumper support. :P

Yes Nissan OZ

They all can get import stuff now.

Oh and Nissan Oz not bringing this model in... bollocks. My build plate says "Nissan Australia Motor Company"...

Brighton Nissan (Melb)

Blackburn Nissan (Melb)

they can both help you.

predator Grand Master

predator

Posted
Posted
Suddenly fibreglass bits sounded a lot more appealing.

At double the life, flexibility, lack of cracking, lack of getting stress cracks.. and I *think* the nissan genuine's come pre-painted in your cars colour (not exactly sure on that though).. I'd pay double for plastic. I had fibreglass front bar(s) on my old car, and no end of destroyings for 2 bars.

Never mind asking a real panel beater what they think of the quality and the stuffing around to fit the fibreglass units. Many of them don't even come out of the mould properly..with heaps of small imperfections which need to be tidied up before fitting.

My current factory plastic bar has quite a few scrapes, but that would have been well destroyed by now if it was fibre.

LTSJayce Veteran

LTSJayce

Posted
Posted
Yes Nissan OZ

They all can get import stuff now.

Oh and Nissan Oz not bringing this model in... bollocks. My build plate says "Nissan Australia Motor Company"...

Brighton Nissan (Melb)

Blackburn Nissan (Melb)

they can both help you.

Thankyou sir! You've been a huge help,seriously!

And to those that endevour to get said GT-R bar fitted to their GTS',good luck-it sounds and appears quite doable!

cowie165 Veteran

cowie165

Posted
Posted
At double the life, flexibility, lack of cracking, lack of getting stress cracks.. and I *think* the nissan genuine's come pre-painted in your cars colour (not exactly sure on that though).. I'd pay double for plastic. I had fibreglass front bar(s) on my old car, and no end of destroyings for 2 bars. 

$519.00 for a front bar is unpainted and not primed. That price was after a lot of haggling and the painter using a few favours. Nissan first stated the retail was just over $700 for the genuine bar.

I agree with you re: cracking etc. which is why I bought a plastic OEM front bar. I am happy with fibreglass Nismo skirts, vents and rear lip though because they'll never flex. The skirts, possibly, but no dramas so far and they're only small.

The cost for fibreglass was around $500 for those three components yet it would have been around $1600 from Nissan for plastic.

Personal preference of course, but I saved where I thought I could.

Cheers Gordon,

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...