Jump to content
SAU Community

Recommended Posts

Ive read around the forum, and found most of the answers to my questions, apart from a few.

1. How do i check if the car is stolen, from either Aust or Japan? I know about the blue plate, but who can i ring to check and what car info would i need to provide them.

2. Buy from a dealer or private? I'm looking at dealers, but not sure where they are. So far, went to SEI imports in Dandy. Answer through experience please.

3. What about buying one that has yet to be imported, like the ones on Prestige Automotive site.

4. Anything else i should look for?

Thanks in advance

Rob

Link to comment
https://www.sau.com.au/forums/topic/100729-buying-a-skyline/
Share on other sites

Whats your budget?

If you finances permit, purchase the car locally rather than importing. There are some fantastic bargains to be found from private sellers, however purchasing from a dealer gives you some fallback in case something goes wrong even though this peace of mind comes with a higher price tag.

If your buying a car thats already registered, do a REVS check on the car and have a competant workshop thoroughly inspect the car you want to buy inside and out.

Whats a REVS check? Is it the vicroads check? ie VIN and Rego number?

RACV check good enough? cause i dont want to be paying everytime i see a skyline i like.

Budget: 17k

Edited by N13Astra
lol thats what i rememba u can c dat my memorys not da gud

lol

thanx 4 the correction

yeh dawg and yo engrish aint good either yo.

REVS check will tell you if any money is owed on the car etc.

Buying ones from like prestige etc can be a long process, might find it may be a bit cheaper than buying locally or via a dealer, BUT it may also be a bit more expensive depending on what car you buy etc.

So how would one go about checking up on a car that is not compiled. Seeing as you cant drive the car to a reputable mechanic? Will a rev's check still be worth while? The car im particularly thinking of is sitting at a Mr Muffler shop, so they may help with a check?

This is for a car that was imported by 'someone' and selling it after getting it compiled and rego'd for the buyer.

  • 2 weeks later...
So how would one go about checking up on a car that is not compiled. Seeing as you cant drive the car to a reputable mechanic? Will a rev's check still be worth while? The car im particularly thinking of is sitting at a Mr Muffler shop, so they may help with a check?

This is for a car that was imported by 'someone' and selling it after getting it compiled and rego'd for the buyer.

Hi, There was a post by merli, in the Tutorials section - (a sticky) - there is some good info on checking the car, if its been stolen and so on. I used that list when I was looking at a couple of skylines today - really worthwhile. The other thing is, Im gonna be using RACV testing as well - just to make sure. But i think if your going through a dealer, ask for all reciepts as well - so you know how much has been spent.

Matt

Alright, seeing as I am in the market for another Skyline, I have been looking up on all this as well... I'll tell you how it goes...

1. REVS Check

When someone takes out a loan for the car, they have the option to get a "secured" loan, which means, if they can't pay the repayments on it, then they give permission for the bank to take and sell the car to get their money back.

So, if they owe money on the car still and sell it to you. Then stop paying their repayments, the bank is well within their rights to come and take your nice new car, and sell it. Leaving you with nothing more than a bank loan... not good.

Requires 2 identifiers. VIN & Rego = easiest.

2. Nissan FAST Software

This can tell you all the specs about the car they way it left the factory. Engine type, Paint colour, interior, options etc... If you notice that it left the factory being gunmetal grey, and its now white... watch out... Basically, use this to make sure everything matches the way it is now, to the way it left the factory.

Now, someone might just not like gunmetal, but it might have also been in a pran and been resprayed, or been resprayed in aus / japan as a "rebirth".

These are the two best things to check... I wouldn't buy a skyline without doing it. Otherwise, there is a great writeup on here about things to check when buying a new skyline... But I can't remember who did it, or where it is :| but wont take long to find / have someone post a link to it :rant:

- Crimpage

Whats a REVS check?  Is it the vicroads check?  ie VIN and Rego number?

RACV check good enough? cause i dont want to be paying everytime i see a skyline i like.

Budget: 17k

as said by others above, it's just a check to make sure the car can't re repossessed because someone owes money on it.

it's free, or $12 if you want a certificate... see here: http://www.revs.nsw.gov.au/

as said by others above, it's just a check to make sure the car can't re repossessed because someone owes money on it.

it's free, or $12 if you want a certificate... see here: http://www.revs.nsw.gov.au/

umm no. its free to check, but to have protection against repo u need to purchase the certificate the day before u buy the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...