Jump to content
SAU Community

Recommended Posts

i found this today on j-spec

http://www.j-spec.com.au/list/index.php?ID=5053

and it is a GTR R33 for 23gs!! yes, u r rite , a GTR!! i know it is a S1 and has done quite a bit mileage( not even genuine), but it is a GTR with RB26.

i remember about a year ago, this was the price u pay for a GTST S2 R33.

it is killin me now as i just imported one myself for over 30gs.

so where do u think the price is heading?

Link to comment
https://www.sau.com.au/forums/topic/103003-where-is-the-price-of-gtr-heading/
Share on other sites

down? the older the car gets the cheaper its gonna be. The importation laws have settled down, and the number of RAWS for R33's is at saturation point. More competition means cheaper prices, combine that with a cheap inital outlay and no outrageous profit margins and that's what you get. Although the local dealers won't have you believing any of that. :P

Half the time cars are expensive is because everyone's willing to pay the current market price, and dealers will bump the price of cheap cars to market price, because they know people will pay it. Although there's also the stupid thing that when a car is actually cheaper than market price, people automatically assume somethings wrong with it.

oh no, I didn't mean you, but in general, people usually assume something's wrong with a car if its cheaper than usual.

u r right, there are dealers who would still sell S1 GTR R33s for above 35 gs, and u know what? there are ppl who buy them, coz they think they are in good condition just because theri price.

and the margin is how much money they make.

im gonna lose so much money when i sell mine :O

^^ if that was the case than why did you buy a skyline..

you surely didn't buy it because of it's value keeping properties.. I bought it because I wanted a performance car..

you will have owned one of the best street drivable cars around.. and sure you'll lose money.. but it's def worth it!!..

and I doubt a R33 gtr will loose as much value %wise than an R33 gts-t..

What's the going rate on compliance for GTRs these days? $2,500 sounds pretty cheap.

It's a good price, but you'd also have to figure in costs of sourcing stock parts, Brembo pads if required, as well as all the other costs (eg tyres but that's a given).

razdollar. apparently 32 GTR compliance under sevs is now down to around $2500 too. I haven't been able to confirm this, but if it's true is makes buying a nice 93 or 94 model 32 a much more attractive option that what has been happening with people seeking out 89 and 90 32s almost exclusivley. (obvioulsy not anymore due to the new legislation).

Really? I haven't really bothered checking around at the moment, I just assumed GTR compliance was still over $3k.. (Non V-Spec) 32s would be cheaper as they don't have to worry about Brembo pads..

Oh well. When are you coming back Richo? Wet T-Shirt @ City RSL next Thursday :)

This is all very interesting, and its a good thing i saw this thread before doing my rebuild.

After speaking with Jspec (very helpful) im on the border of selling my R32 and buying an R33. For the price difference the car is alot newer, and less likely of course to breaking various parts.

One problem that i discovered - OEM parts for compliance, that could work out to be a HUGE cost!!!

Unless i was to stumble across a less that perfect compliance shop....

Has this made anyone else think the same way?

The price here has dropped massively in recent times as the cost of compliance has been slashed and the import duty has been dropped from what I here. The cost in Japan hasn't really dropped that much at all. Just feel for me, I bought my 33 GTR bit over 2 yrs ago, searched for the most perfect one I could lay my hands on, cost FOB 2.5mil yen, 15% duty + 10%GST, plus $7500 compliance as I was one of the 1st to go through the RAWS system. OUCH!!!!!

But having said that, it has been the most enjoyable car I have owned so far by far. . . . .

$2500 is the going rate for compliance on an R33 nowadays, but you'll usually get stung with cost of replacement of perishable parts like brakepads, discs etc. Sucky thing about SEVS compliance is that you need to use the same parts that the RAW has tested, ie OEM Nissan stuff.

R32 compliance is also dropping now (I think $3000 was the lowest I've seen, but then again it might have dropped since last month) as more RAWs get approved to do em.

Sounds like it's worth investigating Steve. I'd really like to see a 1.2M R33 in the flesh just to satisfy my doubts as to it being a sound car. I wonder if you'd miss the R32!? :D

Im definatly investigating, but yeah, i would miss the 32 - nothing beats the original!

I bought my 33 GTR bit over 2 yrs ago, searched for the most perfect one I could lay my hands on, cost FOB 2.5mil yen, 15% duty + 10%GST, plus $7500 compliance as I was one of the 1st to go through the RAWS system.  OUCH!!!!!

I feel for you Jason. Dude you must be like me putting your fingers in your ears singing to yourself trying to ignore current prices.

My R32 was Y1.1 plus the respray and panel repairs when it arrived! :) And then you see beautiful late model R32's with sensible mods going for less than I'm out of pocket.

I'm glad the car is so much fun to drive and work on! Eases the pain :)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...