Jump to content
SAU Community

Recommended Posts

cheapo lights are around $7.50 a bulb. Toothpaste is an abrasive so it makes sense that it would clean the plastic... I've heard it being used to polish other things too, but cant remember.

I polish my glasses with toothpaste once a month.

Sorry. I'll go now.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 1 year later...

I had some overspray on my headlight and cleaned it off with thinners.

What a farken mess! looked like wrinkly skin.

I tried cutting polish, that just made it shiny but didnt get rid of wrinkles and realised I'd really farked up. Tried Auotsol that worked but it was gunna take ages to get rid of all the wrinkles so I stepped up a notch and tried Gumption, that worked better but still a long way to go, until I used a 3m pad with the gumption. That worked really well, still took a while but only 1/2hr,but I to continually clean the pad because it built up with bits of plastic pretty quick. I then cleaned with water and spayed silicon spray on it and it came up a beaut.

If you look at my avitar you can see how farked it was.

DONT DO THIS UNLESS YOUR PLASTIC IS REALLY FARKED

  • 1 month later...
  • 4 months later...

Question, In order to remove the headlights, do i have to take off the front bar? If i do, the front bar for the r33 gts-t series 1 is just 3 screws at the grille, and 2 on each side under the fender right?

  • 4 weeks later...

I dont think u need to remove your bumper to take off the headlights. The actual headlight asembly is easy to take off from the car.

But no-one has answered the question of how to take off the front plastic cover from the headlight assembly. Can it be properly re-sealed? I have cleaned my light 100's of times with that polish from Unique Auto Sports and it is just a heap of crap. It works and looks good for a day or two then bang, yellow again!

  • 2 months later...

Putting your headlights into an oven to pull them apart is going to be risky.. especially if you've never done it before. When I got my R33 series II my headlights were (and still are) frosty looking because of the crap on the inside you just can't clean.

I did manage to find a place in Blacktown called Plastifusion and all they do is headlights. Link --> Plastifusion

They will do the hole oven business thing with your headlights, polish them up (inside and out) and re-seal them again. Unfortunately for me though one of my headlights has some fine cracking. In that condition they won't pull it apart to polish it. I basically need mine replaced :D

Anyone know of a place where I can source some cheap series II headlights? Nissan want $1000+ for a pair :P

There's also a place in Keysborough, Victoria that does change overs (is it Mr. Headlight??) Do a search on headlight +replacement, I read the thread 18-24 months ago...

any link? i broke the screw that adjust the level of the headlights, now they are pointing too high. thx

Could it be these guys?

Melbourne Headlight Exchange Pty Ltd

Unit 2/ 130 Bridge Rd Keysborough VIC 3173

ph: (03) 9706 3922 Auto Parts Recyclers

I couldn't find any website link for them.

When you guys clean the headlights, are you doing it with the lights still in the car, or are you guys actually removing the headlights and then doing it? I just dont want to get toothpaste or the maguires stuff on the paint??

how you going mate?

I just got my 33 back from insurance damage of some moron reversing into it.

The second hand lights put in by "Gold Coast Panel Works" on the gold coast, looked like they were brand new. And I mean brand new when i picked it up. If you bought a new car they would stack up.

They are based on the Gold coast qld. Im not sure how they made these lights from the wreckers look like this.

They are in southport give them a buzz

I guess alot of ppl might have this problem if your line is year 94 and below.Mine's a 93 and the headlights getting a bit yellowish.Just wondering how to make it white and shiny(like big red) again.

thanks

If its just the outside(I thought it was on the inside because tried lots of different things and didnt change) MR Sheen no s**t! took it right off and thats without removing the lights

Edited by BOVed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...