Jump to content
SAU Community

Recommended Posts

that will work well .... kinda on the laggier side with the .81 with a big kic in the pants comming on.... from what i am led to believe rear A/R is determined by inlet and engine capacity to be able to spool up at different times or give more HP depending on the A/r rating...

a .9 would give more hp but spool up much slower

a .7 would spool much quicker but less peak hp

Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1924701
Share on other sites

smaller rear exhaust housing will allow much faster spool up, being a relatively large turbo. My suggestion is to go with a IHI/Apexi AX6 turbo, im running one on my 33 RB27DET and its awesome, spools up early full boost easily by 4 or less and cranks till 9,000rpm or more its a fun turbo to have and u wouldnt regret it, but same thing applies, a smaller rear exhaust housing and itl b crazy..mines larger but i got heaps of engine work

Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1924712
Share on other sites

My engine currently has a HKS 2835 pro s with a tomei 270 procams and a full bottom end, so I figure I've got the hardware, may as well get a turbo to match it. The hks t04z apparently also comes ian 0.61 housing, does anyone have an idea on start spool rpm and full boost rpm? What hp is a Rx6 rated for?

Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1924821
Share on other sites

We have a fully built RB25/TO4-Z (HKS) combo due for completion very soon. Engine is done just waiting on cams and injectors to arrive from the land of the rising sun. We have gone with a 0.81 rear housing as the owner is a bit of a power junkie and top-end punch is what he's after. Will keep you posted with our results. The old engine had a GT3040 (garrett) hanging off the side of it.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1925026
Share on other sites

My engine with a tune from japan currenlty has a rev limit of approx 8,000rpm, so I'm hoping that should widen the power band a bit. I've already got solid lifters and valve springs so I can't see why this can't be extened another 500 rpm or so. DiRTgarage I'd be very keen to see how that car performs, if you could keep us psoted that would be tops.

Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1925249
Share on other sites

My engine with a tune from japan currenlty has a rev limit of approx 8,000rpm, so I'm hoping that should widen the power band a bit.  I've already got solid lifters and valve springs so I can't see why this can't be extened another 500 rpm or so.  DiRTgarage I'd be very keen to see how that car performs, if you could keep us psoted that would be tops.

Yeah ookami, more than happy to keep ya in the loop. Will let ya know how it comes up.

Link to comment
https://www.sau.com.au/forums/topic/104554-t04z-on-a-rb25/#findComment-1925320
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...