Jump to content
SAU Community

Recommended Posts

So what happens if other things are stuffed?

Eg, gearbox, diffs both front and rear, rust spots in different areas, poor or worn interior, exterior, etc.

There are a lot of other things that get worn along the way, which you wouldnt normally consider replacing.

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Considering the purpose of this discussion it would be fair to add that your engine was also rebuilt in Japan before you bought it :huh:

yes, that's true, a bit of cheating i guess :)

but standard rebuild only, no big dollar bits. ;)

So what happens if other things are stuffed?

Eg, gearbox, diffs both front and rear, rust spots in different areas, poor or worn interior, exterior, etc.

There are a lot of other things that get worn along the way, which you wouldnt normally consider replacing.

Which is why Id grab a R33 based GTR, ie a 1997 Nissan Stagea RS260 GTR based wagon.

But I keep forgetting that manuals exist - being 6ft8in tall and with 7 knee surgeries, manuals arnt for me.

I think all the comments i read above were pretty close to the mark.

Plus i would like to add the main reseasons i see most rb26 fault

1/People think they can just turn up the boost on a 15 year engine and trush the guts out of it and it shouldn't have a problem but you must remember the rb26 make power like no other motor it's size or age and it there for put under stress like no other.

2/The mods are done wrong or in the wrong order and things like std ceramic turbo wheels and oil control that are over looked that can cause engine failure.

3/I think the reseason rb20/25 dead engine story arn't told as much as its much cheaper and easier to just grab a replace second hand engine and just drop in, or they upgrade at that stage.

4/Plus alot of the guys going to really push hard on an engine will generaly start with a rb26 over a rb20/25 if money allows.

personally i had a great run out of my rb26 which i lent on hard for 2 years and only had a problem when i left it in the hands of my d..khead brother. But i exspected to rebuild at some stage after run 530rwhp on std internals for 2 years. I believe the rb26 would substain 400rwhp for ever in a day if looked after well.

pete

I think alot of people have unrealistic expextations from the GTR if you paid under 25000 4 the r32

brought a tx3 4 3000 knowing i would have to rebuilt it at some stage and did not care to spend 5000 on it but now it run imaculate

so y would some one spend 30000 and not have a spear 5000 to take it a mechanic and do timing belt + the rest of the belfs ,cvs proper magor service full leak and compresion test.

after car mech a1 then mod

people buy them with out thinking they will need to spend money apart from insurance and mod then go boom

poor gtrs

james

i was lucky , i got a real freshy.... for now i am that impressed with the r32gtr i dont want to whind it up unless i know it wont hurt the driveline ,so i am doing as much research as i can...

i would luv to give it a bit more psi but those ceramic things scare the shit outta me.

Question guys ... if i left this car like this in standard form and drove it to its limits of power . Would it stay virtualy as fresh with in reason with regular servicing.

Curious because rb30ets i have had have gone way over the 450000km in standard form ?

i was lucky , i got a real freshy.... for now i am that impressed with the r32gtr i dont want to whind it up unless i know it wont hurt the driveline ,so i am doing as much research as i can...

i would luv to give it a bit more psi but those ceramic things scare the shit outta me.

Question guys ... if i left this car like this in standard form and drove it to its limits of power . Would it stay virtualy as fresh with in reason with regular servicing.

Curious because rb30ets i have had have gone way over the 450000km in standard form ?

WELL it depends on a few things the previous history of the gtr but yes i think the gtr would last a very long time in std form but i would still loss the std turbos as they are between 12 to 17 years old depend on year of manufacture. A set r34 are still ceramic but only a few years old and can be had quiet cheap (plus they are a better turbo) or the cheapest after market would be the gt2560r 707160-5 able to be bolted on to std format with out stressing the motor at low boost. The only other thing that would most likely come alone would be the clutch but that happens on any performance car.

I have an R32 GTR and i have never had a problem with the motor. The stock clutch is a different story though (but thats what you get with 4WD i guess).

Just steer clear of the dodgy dealers and make sure you get it checked over by a mechanic that knows these types of cars. I dont know if NRMA are any good at inspecting GTR's?

Edited by elboro

Now this is a very broad generalisation,it is not intended to offend anyone,but it appears to me that more performance enthusiasts buy GTR's, and GTS's are bought by guys with less performance aspirations.

The GTR guy will push the envelope,the GTS guy is happy with 220rwkw.

Whether this is driven by available funds or attitutude,I dont know,but I would never consider buying a GTS,not sure how other GTR owners feel about owning a GTS,this is just my opinion.

Cheers

wanna get anymore broad? :lol:

i think the number of people blowing thier RB25 turbos would out-weight the RB26 turbo family.

But i think RB26 owners sometimes as too much, and have people who work on them with not enough idea/expiriance to do a good job

They all pop when used for motorsports and pushed to there limits, its only a matter of when

m&m not sure about your post, I've got 400+rwkw at 20psi and have ran a 10 second pass with pump fuel and radial tyres in my GTS what have you done in your performance enthusiasts GTR

I said it was a broad generalisation.

My GTR makes 370rwkw on 98octane,am putting 110 in it in a fortnight and hoping to emulate your 10 with 400+rwkw.

Plus I drive my GTR for 8 hours a day,1000km a week,its my repmobile,enthusiastic enough for you.

Well,I've had the car for 4 months,and as I drive it every day,all the time,getting it off the road to get it prepared isnt an option.

Before that I put 187,000kms in 4 years on a 250rwkw S15 that blew the clutch and gearbox first time out at Calder.

Do you do 1000km a week in your car.Do you drive it around for 8 hours,then roll up at the track,race,drive it home,then take the kids to sport in the morning.

Next time I see a rep in 370rwkw Skyline I'll dip my hat to him.

Sorry if my comment upset you,its just that I've been driving for 25 years and I've never seen anyone lust after a lesser model of a car.

hahah you are right GTSt drivers ARE all soft

Anyway, my GTR does an average of 1 engine every 1.5 races over a sample of 3.

:P

but like Mr Edit said "people fu(king with them who dont know what their doing" thats my problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...