Jump to content
SAU Community

Recommended Posts

I have found that there are basicaly two types of people in the world ..those who turn the stereo up louder when they hear a rattle or a squeak and those like myself that get someone else to drive while they crawl through the car in a search and destroy mission that can only end in the elimination of every possible none essential sound. The stagea being a wagon will probably have its fair share of these and like most cars...what sqeaks in mine will probably sqeak in yours sooner or later..so.. I thought that we could put the power of many to work and start a list of rattle and sqeak find and fixes.

So far mine is pretty good and like most cars, some noises tend to come and go under certain conditions. It's the ones that are there most of the time or that come and go on a regular basis that start to get on my goat. So far I have one somewhere around the glove box that I cant track and one in the rear which I think is coming from the floor panel that covers the spare. I am going to try a bit of gaff tape around the panel holding points to try and keep the panel tight.Its trial and error but I think there is nothing like a nice tight sounding car.

cheers.

I get a plastic clip on metal sound coming from the rear driver side somewehre.

I get a fan hitting casing sound from the climate control fan (it only just started last week)

I get a clunk from the rear of the car. Probably CV or wheel bearing.

I get a water gushing type sounding noise from the front of the car when i turn it on after a cold night

I cant think of anything else for now, but as is evident, I listen for noises!

i've had a dull rattle in the rear of the car for about a year now. since it hasn't gotten worse i've ust ignored it. only started once i got the suspension replaced, so i'm guessing the stiffer ride has made it move around a bit more sudden

I think there is nothing like a nice tight sounding car.

Funny, that's an oxymoron - the definition of a tight sounding car is that it makes no noise - except for that sweet exhaust note. :lol:

LOL funny answers. My induction roar is exactly that, with 160awkw its a ROAR - too loud.

My stereo can go pretty loud, so that gets cranked a fair bit.

But the front suspension doesnt like those 'little' speed humps that are quite 'steep' (generally found by my local bourbon supplier) - big groan as mentioned above.

I havent noticed anything else, besides slight squeek from a disc when cold at low speeds, very intermitant, but a normal replacable item so not concerned at this stage.

  • 2 years later...

I thought this was an interesting & useful topic that died an early death... so attempting to resurr-erect it:

Only noise I've noticed so far is the same as AlexCim's here:

I get a plastic clip on metal sound coming from the rear driver side somewehre.

I get a fan hitting casing sound from the climate control fan (it only just started last week)

I get a clunk from the rear of the car. Probably CV or wheel bearing.

I get a water gushing type sounding noise from the front of the car when i turn it on after a cold night

I cant think of anything else for now, but as is evident, I listen for noises!

I just have the 'fan hitting casing sound' (so far).

...and I found a matching solution (also from AlexCim)...

...

Over time the fan can become dirty and therefore unbalanced, this will then cause it to "tap" against its housing.

Happend to me about a year ago.

This sounds awesome - I might not have to replace the fan :) I'm going to check mine asap

I thought this was an interesting & useful topic that died an early death... so attempting to resurr-erect it:

Only noise I've noticed so far is the same as AlexCim's here:

I just have the 'fan hitting casing sound' (so far).

...and I found a matching solution (also from AlexCim)...

This sounds awesome - I might not have to replace the fan :laugh: I'm going to check mine asap

how do you access it?

as mine sounds like it needs a clean...

-Ryan

how do you access it?

as mine sounds like it needs a clean...

-Ryan

Under the glove box... will post more details when I have found it :laugh:

...

Climate control fan is noisy, even after cleaning.

damn so the clean didn't fix for you? anything touching the blades? lots of play/look out of balance?

I've traced a grinding noise that can be heard around the drivers seat. It appears to be coming from the drivers teeth, particularly when watching how fast the fuel tank needle is dropping.

Seriously though, there is a fair amount of what sounds like diff noise coming from the front when slowing down of the accelerator, but I'm hoping thats just the 4wd system and its completely normal.... Tell me its completely normal.... I'm broke now :D

Edited by Qumulys

I can (sometimes) hear a crackling noise when I floor it, it just seems to be while it's during it's 'zomgogogoboost' phase

Comes from the front of the car, I think it might be the turbo/intake but a mate reckons it's coming from the drivers side

I can (sometimes) hear a crackling noise when I floor it, it just seems to be while it's during it's 'zomgogogoboost' phase

Comes from the front of the car, I think it might be the turbo/intake but a mate reckons it's coming from the drivers side

A few cars I've driven make a noise a bit like this - under high load/low revs/WOT conditions they manage to squeeze a bit of exhaust out of an imperfectly sealing exhaust manifold and it makes a kind of 'crackling' sound, almost like pinging... shows up most when going up a particularly long/steep hill on a hot day

at the moment i have a really annoying clicking sound from my cv's when i turn,noisy bushes in front squeak/clunk over bumps and braking,and besides that just the kettle sound from my pod filter. :) anyones knows a good place for bushes/cv's in PERTH,let me know,cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...