Jump to content
SAU Community

Recommended Posts

Does anybody know if the Nismo Keys that are gettin around fit a Stagea?

I asked Nengun, and they said they don't think it will cos the Stagea is similar to the ER34, not a definate answer so i thought someone on here would know for sure.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/
Share on other sites

I've got a nismo key (blank) that l'm using for my other car, which supposedly fits most skyline's, so l'd be under the assumption it would be fine, as l can't see there being much difference between the stagea key barrell & the R33's.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1943407
Share on other sites

Also, make sure whoever cuts it does a good job, as obviously replacing it will be a rather more expensive proposition!!!

I'd probably take it to a keycutter rather than your local hardware store who might cut maybe 2-3 keys a week...

It's not like you've just shelled out for a key that you could have bought directly from the cutter for $2 (or whatever a blank key costs nowadays).

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1947889
Share on other sites

Thats exactly what i'll be doing, they should be able to use the number off my original key, and punch it out on the nismo key, i've had that done before.

Much more acurrate than cutting with the grinder when they copy a key.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1949680
Share on other sites

Mines still got the numbers on it ;)

Oh by the way, i emailed Greenline and they have confirmed that the Nismo key, that they and Nengun sell will fit the series 1 stagea, don't know about the series 2 though.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1963379
Share on other sites

on the subject of keys, does anyone know how to program the chip in the key hob to enable remote locking?

i cut a blank nissan key to match the original for a spare. the hob of the key has 2 buttons: lock & unlock.

the newly cut key starts the engine fine (i was suprised!) and now I want to know how to program the chip in the key hob so remote locking works.

sometimes there is a bizarre sequence of actions like insert & remove key 5 times in 10 secs, open/shut door etc.

any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1973013
Share on other sites

My cousin had a key programmed for her N16 Pulsar, can't remember where she bought it, but had it programmed by a Nissan dealer.

It might be an idea to ring your local dealer and see if they can do it, surely the sequence can't be too different between models.

Also, I believe there are some places who cut keys who are also able to do the programming for you, if you still can't manage to find the sequence or process to do it yourself.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1973084
Share on other sites

i only got one key with my car, and for some reason it's bent. it still starts the car, but i doubt i could get a key cut for it. some genious has ground off the numbers on the key as well.

to get a key cut fresh, i'm assuming i'll need to take the car to a dealer or locksmith for them to get a number off the ignition barrel?

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1973482
Share on other sites

Cool, interesting reading chook! Wonder if it works with aftermarket ECU's, eg PowerFC?

Meh still, when I got my Mongoose alarm hooked up, it disabled the key door lock/unlock from working, good thing I got two alarm keyrings :)

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1973580
Share on other sites

Thats exactly what i'll be doing, they should be able to use the number off my original key, and punch it out on the nismo key, i've had that done before.

Much more acurrate than cutting with the grinder when they copy a key.

Please note that size 10 keys have been discontinued.

Only some places still have the item in stock.

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-1974442
Share on other sites

  • 2 months later...

Its amazing what u find out about Stageas.

Only today i asked my local M10 for a spare key they said they could cut.

Now i've read this. Hmmmmm! The numbers have been ground off the only key supplied.

This whole Forum is getting like the X Files!

Link to comment
https://www.sau.com.au/forums/topic/105382-nismo-key/#findComment-2121576
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...