Jump to content
SAU Community

Recommended Posts

I bought a polished 'gtr' key from Nissan, which fits fine. The local locksmith not only cut 2 test keys to make sure it was all good (and she let me have them for nothing), but she wrote down what the code was, so I could get more cut if needed (Now that I have 4 keys, I don't think it will be an issue!).

I guess that means my code was missing too....

I bought a polished 'gtr' key from Nissan, which fits fine. The local locksmith not only cut 2 test keys to make sure it was all good (and she let me have them for nothing), but she wrote down what the code was, so I could get more cut if needed (Now that I have 4 keys, I don't think it will be an issue!).

I guess that means my code was missing too....

how much was the key??

I just brought normal Nissan keys - about 13 bucks from Nissan spare parts. I was thinking about getting the one with the keyless entry (because i've got one already) but at $365...no way i'm paying that much for that (well i'm getting my alarm installed next week - there's my keyless entry. lol)

where can i gat a programable remonte key and how much will one cost. i checked at my local nissan dealer. they quoted me $230 + $60 program fee. can i get one cheaper as this seems way too expensive.

thanks

$230 is about the cheapest ive heard, where was this quote from ?

You can code them yourself, plenty info on net, pm me if you cant find.

Edited by chook

When i lost my only genuine key i got the locksmith to "read the cuts" on my crappy backup (it was pretty bad - hard to turn on ignition and would not open the boot at all) - then cut it on a cheap key - went out and tested then got two genuine blanks done to code.

He also stamped the code on one of the keys for me.

  • 1 month later...

Anybody know any details about the actual key part of the whole assembly for series 2 standard key?

Especially can I use a standard key, chop it, and attach it as per the right-hand-side of the picture below (thereby using a second-hand key assembly with my own actual 'key' part which I can get copied). Is there any use to this? Anybody tried it?

post-32445-1205420765_thumb.jpg

  • 3 weeks later...
It's got me wondering why the numbers have been ground off the keys, Maybe a security issue in Japan or something, if someone gets the number they can get a key cut, very strange.

Still got my numbers on keys for both the black S2 RS4 and the silver S1 RS4.

:rant:

  • 9 months later...
Hmm, oddly enough, the numbers on my keys have been ground off......

And mine 2 WHATS WITH THAT? i only got 1 key from the dealer but i got plain spares cut anywhear easily but car keys over here r very dear, 7-12 buks each, pretty f*ked price !

also yor remote alarm/central loking button remote is easy 2 get spares from an alarm installer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...