Jump to content
SAU Community

Recommended Posts

Can I make a suggestion.

to prevent further piss taking, by others, on you....

you don't post on here about your dyno queen until you run in the low 11's or a 10 at some mph that you think you can.

you're just making a fool of yourself.. talking yourself up.. LNEMUP bro.. and so forth..

then making excuses about diffs and radiator caps.

sorry to sound harsh but you had it comming.

SK predicted a 12.5 at 120mph and you arc'd up and said

Listen buddy

if your so confident in your car

LNEMUP

Any time

Wheres your so called RB31 In a dream or what

just like a little kid who's just been told his toys aren't as good as he thinks they are...

and what happened?

you didn't even get the time he predicted.

then ADRIAN just posted he drove a car with 285rwkw (probably with stock diffs and radiator cap on) and got a much better time and a higher terminal speed.

props to you for getting such numbers from an internally stock rb25.. I've got no issues there, but your attitude just pisses me off.

LNEMUP.... for f**ks sake..

was 2SIK4U2C2BME4U taken?

attitude adjustment needed in isle 5.

Can I make a suggestion.

to prevent further piss taking, by others, on you....

you don't post on here about your dyno queen until you run in the low 11's or a 10 at some mph that you think you can.

you're just making a fool of yourself.. talking yourself up.. LNEMUP bro.. and so forth..

then making excuses about diffs and radiator caps.

sorry to sound harsh but you had it comming.

SK predicted a 12.5 at 120mph and you arc'd up and said

just like a little kid who's just been told his toys aren't as good as he thinks they are...

and what happened?

you didn't even get the time he predicted.

then ADRIAN just posted he drove a car with 285rwkw (probably with stock diffs and radiator cap on) and got a much better time and a higher terminal speed.

props to you for getting such numbers from an internally stock rb25.. I've got no issues there, but your attitude just pisses me off.

LNEMUP.... for f**ks sake..

was 2SIK4U2C2BME4U taken?

attitude adjustment needed in isle 5.

:O it's funny, because it's true.

Yeah, i suggest you get your dyno calibrated or something, coz with 500rwhp which is around 370rwkw you should have a much higher speed than 118MPH......... Also i find it hard to beleive a GT35/40 can make 370rwkw on 18psi, your MPH indicates it doesnt, so maybe fix your dyno.

Im not going to buy into that argument, but in watching the runs I think its fair to say that

on this occasion it might have been more driver inexperience rather than the car. the car sounds

really snappy, im sure it will go fast, I think you should run it a few more times before you start making drastic changes as you really dont have any data to go off as you really didnt do a clean pass.

dont stress, ive had customers that have had 10+ runs in a day before they got it all right.

Be patient, it will happen.

At MR GTST

Wheres your piece of shit

lets see you race

first time out in this car

at like i said i was only crossing the line in third gear

you wanna argue ill meet you somewhere and be happy to argue wit you there you said case

adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

when i run the number ill post it back on here so you can wank over it and type somemore shit and jealous comments about it

you dickhead

Edited by MR331307

bahahahahaha...

1.) my piece of shit is at work.. why does that interest you?

2.) first time out in that car.. then why talk it up LNEMUP... still can't get over how cocky (or should that be cockhead) you are. and when I asked you a while ago on this thread about your drag racing experience you dribbled on about a whole heap of shit that you've raced so you should have the experience to drag race properly, gearchanges, get the revs right, launch and so forth..

3.) Adrian doesn't talk up what he does. he just goes about his business and runs ridiculously good numbers.. so again, you have this ego about yourself/car that reminds of the young lebs I see around the shops who have taken steroids and done bicep and chest work and walk around with a chip on their shoulders.. maybe they had the license plate you originally wanted.

Why would I be jealous of ANYTHING that you have accomplished on here?

you accomplised a figure, on a dyno, which YOU calibrate. you've done nothing special.. you bolted on a bunch of parts that has been designed and made by other companies.

installed a computer "designed by another company" and made changes to parameters on it to change timing, fuel, air, and tuned your car to within an inch of it's life.

just because your car has been on the dyno for 11ty hundred hours doesn't make you my hero.

and I've got news for you.. when you run your 10 second pass, and post on here to show people the size of your E-WANG, I will reply with a "Congrats"

that don't mean I am jealous or wanking over anything..

you need to grow up mate.

if you want to impress me (and you know deep down you need people to be impressed with you), do something that others can't.

anyone with money and time can bolt things to a engine and do what you did.

go beat a world record using nothing but your own capabilities..

then it's impressive..

anyway, I assume you already don't have many friends due to your attitude, or you're upset cause your teacher kept you back for afternoon detention or something, I'll leave you to your penis extention.. I mean dyno numbers.

hope you run your 10 so we don't have to see your cocky updates on how you're "GUNNA" do this and that..

best regards

IBD14U2C4SIKNE55ULEH

I estimated the first time out ET and TS pretty well, not to be a smart ass, but to simply voice my opinion. I based this estimate on;

1. The power curve of the engine, it’s as peaky as you would expect

2. The heat soak it is going to suffer with no ambient air feed and no heat shielding

3. The obvious inexperience of the driver and his crew

4. The total concentration on engine, with all other items seemingly ignored

So shall we have another guessing competition for its second attempt?

Hopefully the driver will have learnt a few things, the heat soak issues will have been fixed and the crew will be able to get the car to complete more than 2 runs. Without any other changes I reckon;

11.9 at 123 mph

Anybody else care to have a go?

:D cheers :D

PS; keep in mind I tried to warn of items 1 and 2 and got insults in response.

Edited by Sydneykid
adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

12.9 @ 111mph (15psi, bogged launch, shakedown)

12.0 @ 116mph (20psi, spun hard in first, stuff-up)

11.7 @ 121mph (20psi, better launch, happy driver and owner)

Adrian doesn't talk up what he does. he just goes about his business and runs ridiculously good numbers..

You're too kind....no...really :D

Adrian

At MR GTST

Wheres your piece of shit

lets see you race

first time out in this car

at like i said i was only crossing the line in third gear

you wanna argue ill meet you somewhere and be happy to argue wit you there you said case

adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

when i run the number ill post it back on here so you can wank over it and type somemore shit and jealous comments about it

you dickhead

Time to calm down. Anyone else would have been sent packing by now.

Continue and i'll throw ya some points.

You've done nothing really constructive since you started this thread with more claims than a Demtel Add.

Its almost bordering on me deleting it.

The flack you are now getting now is a direct result of your arrogant attitude to begin with.

You can say it will "run 10z"... i could say that about my car aswell... who is more correct? No-one.

Until it does run a time, i suggest you stop saying "it will do this, it will do that"

This is a happy place. Not a place to come sprog about how good you are.

LNEMUP ..hhahahah

what a great saying..

:turned:

Adrian, Buster, Pauly D, as much as id hate too admit, this sounds like the RB25 version of the book, and it also has the sideline comments from people ive never seen at the track. this is big - But Adrian is still the best driver ever - and the best looking by far.

12.9 @ 111mph (15psi, bogged launch, shakedown)

12.0 @ 116mph (20psi, spun hard in first, stuff-up)

11.7 @ 121mph (20psi, better launch, happy driver and owner)

You're too kind....no...really :turned:

Adrian

it took you three goes , 11.1@ 119 back to back, fist drive ever in someone elses car, im yoda, your O B One HA Ha Ha

You're still far better looking though - and younger!

hahaha don't tell everyone that the book exists for GTST not everyone knows :turned:

This ones the armchair edition, but my favourite bloke anywhere at any time is Adrian. Damn, he's just so good I can barely contain myself.

:D

(Be careful who you mess with, Stuie!)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...