Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I thought improved production rules stated that you can use any engine as long as the maker of the engine was the same as the maker of the car.

so it eligable?

No an R32 GTST is not eligible for IPRA.

The only grey imports legal for IPRA ar e R32 GTR and S13 Silvia.

To be eligible for IPRA, a car must be either:

1) Group A homologated

2) commercially available to the public in asutralia as new cars through a manufacturer's dealer network, or

3) otherwise recognised by CAMS...for group 3J

S13 silvia is the only grey import recognised by CAMS for IPRA http://www.cams.com.au/bulletins/B06-019%2...%20Vehicles.pdf. So an S13 chassis is allowed, but only with S13 silvia body. And only with CA18 and SR20 engines that were available in that model. Not permitted to run a 6cyl engine in that chassis, as the block must have the same number of cylinders/rotors as standard, and the same configuration of cylinders as the standard car (ie in-line, horizontally opposed).

S14 and S15 are eligible as they were sold here.

R32 GTST is not eligible. R32 GTR is group A homologated, and therefore OK.

No R33 or R34 is eliglible.

only allowed to use engines from eligible vehicles, so RB20 and RB25 variants are not allowed. No eligible vehicle had them. RB30 is OK, and cyl heads on approved blocks are free for early model vehicles. If you use a non-standard head or block in a late model vehicle, you must comply to minimum racing weights- ie 1602-2000cc (non turbo) 1045kg. turbo 1.8 or 2L 4cyl = 3001-4000cc 1285kg, but they must have the same number of cyl in the same config as the standard car- eg in-line 4cyl can only be replaced by another inline 4cyl engine from the same manufacturer.

1.4 Automobile make and model: Vehicles manufactured by the same company but under a different brand name are considered to be the same make, eg, Nissan/Datsun, Mazda/Eunos, Toyota/Lexus etc. Any component fitted to a production vehicle will be regarded as belonging to that manufacturer of that vehicle irrespective of the actual source of manufacture. Manufacturers are not considered to be the same solely by virtue of having a common parent or holding company. Model refers to a member of the same family of vehicle as produced by the manufacturer.
I've always interpreted this as "if the GTR is eligible, then so is the GTSt", as it is the same model as a GTR, ie R32, but a different spec. Although I could be misinterpreting it.
I've always interpreted this as "if the GTR is eligible, then so is the GTSt", as it is the same model as a GTR, ie R32, but a different spec. Although I could be misinterpreting it.

that's simply a definition of make and model, and you interpretation is correct, but that sentence does not make any make or model of vehicle eligible. You need to read the section on eligible vehicles. Eligibilty is granted on a per vehicle basis, not on a model family basis.

All models of Touring Cars with DOTAR's import approval are elligible for Improved Production. They are commercially available in Australia. To have you model included you just apply in writing to your State's elligibily officer. The list is updated continuously.

:whistling: Cheers :stupid:

PS; An R32GTST ran in the Improved Production Nationals last time they were in Tasmania, where they are again in 2006.

All models of Touring Cars with DOTAR's import approval are elligible for Improved Production. They are commercially available in Australia. To have you model included you just apply in writing to your State's elligibily officer. The list is updated continuously.

:O Cheers :devil:

PS; An R32GTST ran in the Improved Production Nationals last time they were in Tasmania, where they are again in 2006.

from my previous post, which is directly out of the 3J regs in the CAMS manual:

2) commercially available to the public in australia as new cars through a manufacturer's dealer network

DOTARs doesn't count. You must be mistaken about seeing one compete at the nationals in Tas. Or maybe they didn't get a full grid and invited other categories to make up numbers?

the list of specially approved models is

1. Mitsubishi Mirage Cyborg (to cater for ex Mirage Cup cars)

2. Nissan Silvia S13 (turbo and naturally aspirated)

that's it

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome!  How long have you had it? And what colour is it?
    • "CAD" version 1.0 It will have a 15mm lip around the top for 6 × 5 or 6mm nutserts and fixtures (two on each of the three straight edges), and some pinch weld on any exposed edges, it has three mounting points, one of the power steering reservoir bolts, and two on the rad support, my 120mm hole saw will make short work of hole for the silicone joiner, with ample room for some pinch weld  I've also got enough Carbuilders "peel and stick" heat shield to cover the outside of it at the coolant expansion tank and on the engine side, as pictured, and internally on the lid and where the fuse box is, I've also got some thin, about 3mm, black 3M single sided sticky foam stuff that was left over after sealing some door drafts at home to help seal the lid As for the shape, it "sort of" matches the shape of the fuse box, so shouldn't look to "out of place" The lower area and hole for the intake will need pinch weld with a balloon on it to fully seal the hole and bottom of it, that will happen after it has been fabricated so I know exactly what size is required  Filter service has been trialed,  and so far it was a simple process  Just need to get some alloy, and then head into work to use the guillotine and break press in the workshop Hopefully it should be sorted in a week or two Guestimated outlay will be under a $50 for the stuff I don't have on hand (alloy, 6mm nutserts, the pinch weld, and wrinkle paint) Disclaimer: That's what the "voices in my head" are telling me how the filter box should end up getting done......lets see if they know what they are talking about  
    • Have been polishing up the trailer rims as they had been sitting in the shed for a few years and are really in need of some love. This was after a couple of passes with chrome polish - coming up quite well ✅ .
    • Welcome aboard! Is your Skyline auto or manual? I'm assuming manual. Does it have any mods done yet?
    • Hey mate, the brown and grey plugs would usually go to the TPS, brown one goes on the bottom connector and grey is the top but isn't used unless the car is auto, your TPS looks different to mine though I've got a series 2 engine.
×
×
  • Create New...