Jump to content
SAU Community

Recommended Posts

Car in for service - two of my injectors are leaking fuel on R32 GTR.

I can either:

- replace two buggered with 2nd hand stock 444cc

- replace with 6 nismos

- upsize to bigger injectors

Nengun has a deal on SARD 700cc but I don't know if 700cc injectors will be usable in my car

Car is only lightly modded GTR (HKS pods, cat back, restrictor removed) makes about 170KW at wheels.

Advice please?

I have a new Power FC in the box at home - will fit it if I have to, but kinda like the car the way it is.

:P

Any advice gratefully received.

If your happy with the current power it might be an idea to find two replacements.

do u even own a skyline? no skyline owner is ever happy with the power...allways MORE MORE MORE!!! thats me anyway... id b putn bigger injectors and pfc mate

Car in for service - two of my injectors are leaking fuel on R32 GTR.

I can either:

- replace two buggered with 2nd hand stock 444cc

- replace with 6 nismos

- upsize to bigger injectors

Nengun has a deal on SARD 700cc but I don't know if 700cc injectors will be usable in my car

Car is only lightly modded GTR (HKS pods, cat back, restrictor removed) makes about 170KW at wheels.

Advice please?

I have a new Power FC in the box at home - will fit it if I have to, but kinda like the car the way it is.

:cool:

Any advice gratefully received.

Depends on where what level of mods you want to do with your R. If you really are happy with the present level of performance, perhaps consider getting the leaking injectors repaired/diagnosed at a specialist injector place and then getting all cleaned and flow tested.

If I had a "spare" PFC, I would certainly be getting this fitted and tuned ASAP as it offers good "bang for buck". Consider fitting adjustable cam gears at the same time and you will be amazed at the performance increase for the moderate cost outlay. Standard injectors will cope with this power up just fine.

do u even own a skyline? no skyline owner is ever happy with the power...allways MORE MORE MORE!!! thats me anyway... id b putn bigger injectors and pfc mate
Why bother wasting money.

Stock GTR injectors can support round 300rwkw. Replace the 2 stuffed ones with stockies..

But i would definately hook up that Pfc and get it tunned, it would be a different car when you get it back, especially if you turn up the boost a little :cool:

i've got 650cc sard injectors in my rb20det

got a highflowed r33 turbo in it, works fine, 700cc injectors in a rb26 would be ok i'd imagine because the powerfc is pretty good at controlling big injectors

also if you are interested i have some brand new 550cc nismo injectors that i never used, i bought them for my car but ended up going the sards instead. pm me and and i can do you a good deal on them.

xfixiate - you will be totally amazed at what a PowerFC will give you over the stock ECU.

Also with an adj cam gear... it'll be a totally different car

Smoother everywhere, more power to boot.

Personally just buy some second handers, and reco all 6.

However, If its going to cost more than $600 for full reco of them all, i would just spend the extra few bob and get some 555 Nismo or similar.

You dont needs 700's... thats overkill.

I think you're right.

Two second hand ones are going to cost me $100.

Prolly another $150 to get them cleaned. And $20 in freight

So $270 to reco old ones. And assumes I have no more problems.

I should be able to get around $200 selling the existing set.

Nengun wants $640 for 6 brand new SARD 700cc delivered. Little more for Nismo or HKS.

So $440 real cost.

Or, $180 gives me new ones. Damn stupid not to buy newies.

xfixiate - you will be totally amazed at what a PowerFC will give you over the stock ECU.

Also with an adj cam gear... it'll be a totally different car

Smoother everywhere, more power to boot.

Personally just buy some second handers, and reco all 6.

However, If its going to cost more than $600 for full reco of them all, i would just spend the extra few bob and get some 555 Nismo or similar.

You dont needs 700's... thats overkill.

Car in for service - two of my injectors are leaking fuel on R32 GTR.

I can either:

- replace two buggered with 2nd hand stock 444cc

- replace with 6 nismos

- upsize to bigger injectors

Nengun has a deal on SARD 700cc but I don't know if 700cc injectors will be usable in my car

Car is only lightly modded GTR (HKS pods, cat back, restrictor removed) makes about 170KW at wheels.

Advice please?

I have a new Power FC in the box at home - will fit it if I have to, but kinda like the car the way it is.

:D

Any advice gratefully received.

HOLD THE BUS

can we get the moderators to DELETE this post

if word gets out that this guy has a GTR with only 170kw at the wheels (and he's happy with that) - I'll have every noob in a modified WRX lining up with me for weeks :)

Seriously - I'm seeing 280+awkw with std injectors and a PFC in my R32 GTR (I'm on their limit tho) Get some 2nd hand 440cc units flowed and test and you'll be good to go.

BUT - if you want to take advantage of the Nengun offer – and get the 700cc Sards – I'll be more than happy to do a swap with you ;)

Also – I agree – get that PFC installed. You'll jump to 220+awkw over night. It WILL transform the car and your driving experience (no down side)

Edited by itbmils

ahhaha, evan more the reason to leave it... then you can go chop chop scoobiedoo.

pfc, 700cc injectors is nice. youd only have to get them later. sooo giddi up..

wont have any adverse affecs. just hooke them up. :D

besides stock injectors on 14-15pounds are at 90-95%duty. (no point having sequential injection)

(with standart turbs)

But, doe't injectors have to be matched sets?

I mean, if the other 4 are worn, won't the two new ones create an imbalance?

Oh bugger - how can I tell what injectors I have now???? they might not be stock or genuine??????

If you flow test the 6 you're going to run and fit the PFC, you can adjust the relative flow of each injector based on the test results.

Install the PFC man!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...