Jump to content
SAU Community

Recommended Posts

Hi guys,

anyone know who sells and installs mongoose alarms in the ACT ?

I am after the M80G

Cheers

-JD

Mongoose is crap had one already, gave me nothing but problems, had to get it taken back out and fitted an Autowatch alarm (456rli) with anti-hijacking and works brilliantly

Mongoose is crap had one already, gave me nothing but problems, had to get it taken back out and fitted an Autowatch alarm (456rli) with anti-hijacking and works brilliantly

really??

I have been a dealer for them for the past 3 years nd have had ZERO problems with them. yours sounds like an install problem as the units do not stuff up. ( also stop pushing autowatch, we already know its a good product.)

www.mongoose.com.au and look under dealers. or ring the hornsby office and ask.

JD II

Pretty sure both BDL at Fyshwick and Braddon Car stereo both do Mongoose stuff.

As for nothing ever going wrong with them, I had a Mongoose fitted less than 18 months and one of the remote keyfobs decided to "stick" on and kept randomly locking and unlocking the doors. Don't see how that one could be an "install problem".

I was also told that a turbo timer could be added to it later on. When I went back "later on" I was told that it couldn't be done but they would be happy to install a better system that could for like another $500+.

Not in the habit of bagging a business on here, PM me if you want to know where it was done.

Yup ^^ Total bullshit isnt it. I went back yesterday to get my turbo timer installed... its already wired, all they have to do is stuff around with the modual! Wanted $120 for it, what a rip off:) I'll deal with it myself for that price.

Dayne

if you have a 60 or an 80 buit within the last two years it will take a time. in teh case of a 60 you need to fiddle with the module . the 80 needs option 13 turned on. remotes are a warranty item so if one stuffs up take it back to the dealer. what I meant buy zero problems was teh main unit.

JD33 ( shop would be nice- that way I can keep people clear of it.)

Guys, you walked into the trap yourself by saying "ill be back once i have a turbo timer". Make them put in writting that they'll do it for free when you come back. Its not rocket science, not all businesses are out there to soley serve the customer.

Yeah either BDL belconnen or fyshwich stock them.

  • 3 weeks later...
Does anyone know if the sensitivity of the Mongoose alarms can be adjusted?

It goes off way too easy.

I swear if an ant farts within 10 feet of it, it would go off. Annoying as hell.

What type of sensors do you have on it? most of the sensors can be addjust with ease, a matter of turning a screw on the sensor.

I got a mongoose 60 series fitted roughly 12 months ago and no probs. Recently bought a

timer and rang the guy who fitted it to see if it can be done. He said no worries. Anyway spent

an hour on it as he had to remove the dash to connect all the functions that the Greddy timer

comes with. On the alarm module he just flicked a switch for the timer. He also upped the

sensativity by turning it with a small screw driver. So now when the car turns off about ten seconds

later beps once and all done. By the way he charged me $80 to fit the timer ( that was come to me ).

Also a friend with a R33 has the same one as does my dad, all fitted by the same guy. Alarm is normally

$300 supply and fit, but for the R33 was $350 as he had to fit a central locking motor to one door

so both would open with the pager. His details are Mode auto electrical. Peter Bevc 0418369634.

Cant say enough about this guy as he is polite does good work and the best thing of all, He comes

to you. :)

PS: sorry JD this guy is in Vic.

Edited by mickr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...