Jump to content
SAU Community

Recommended Posts

let me get this straight

10% lower

so this car on any other dyno would make ......

319 divided by ten is 31.9 in case you dont know / cant work it out

319 by plus 31 would be 350

THREE HUNDRED AND FIFTY REAR WHEEL HORSEPOWER FROM A STOCK TURBO

does that even look remotely close to being right for you? dont dance around the question, answer it! does that look like something that would normally happen on a R33 Skyline powered by a RB25DET motor with minimal mods? just answer that, i dont want stories about corrections , timing, dynos, just answer me that

jesus snap out of the day dream!

Edited by [teejay]
  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

Didnt realise that this thread was about Bretts car

the 53 degree inlet also seems pretty funny.

im not accusing anyone of anything or the like, my call here is that this thing must have hidden mods. you just need to find them.

End of the day Brett made his power 2 odd years ago, old news, lets stick to this other mystical freak 33 shall we?

Edited by [teejay]
All Dyno Dynamics Dynos should read almost identical results if in Shoot out mode? No matter what intake temp!

Wrong. Well, sort of. The inlet temp sensor has to be placed in such a way that it ACURATELY reflects the ACTUAL temp of the air entering the engine (usually before the filter).

u would think u work for xspeed or hyperdrive. give steve a break, he is only tuning it he doesnt know the exact details of the internals/mods. :)
^^^ i agree....Steve is only doing the job he was asked to do...maybe Teejay you should pay for the labour to find out what is in this car....then we would all know what 'mods' it has!!!

Ezz up on Steve he is a top bloke!!!!

Ive offered a free dyno run to confirm the figure... no reply as of yet. Would be on a brand new DD dyno , 4wd in ground, with the latest and greatest of everything.

I dont work for any performance shop, i work for the Water Corp, ... but i also work for Perth Street Car magazine.

Would make a really cool story "car makes amazing power with little mods"

Call my questioning of this "research" since i get sick of the crazy amount of people who will come and make wild claims like this (not saying this is!).

Ease up on who and why? Im not attacking anyone, I'm just incredibly keen to see a real answer to this mystery, not "oh it made the power its true, it must be" Im not questioning the power, just how its made. read my other posts to see where im coming from. Steve chooses, to answer, i choose to question, its all been done in a civil non rude / attacking / slanderous manner, so whats the issue?

I just want it played out to an honest answer. If it ends up being that its made the power with the stock turbo, ill applaud it.

Till then get your emo out of here, and let some interesting Skyline related talk keep going. Wasteland for you if you cant handle the skyline chat.

Teejay there is no emo from me...but Steve is only asked to tune the car not find out what mods it has to make the power....Its up to the guy to get someone to check out how it can make this power and as you put it snap out of the day dream or prove that it is from a stock turbo with min mods!!!

OK i cant back the 299.1 car yet but early this week a GTS with SAFC cooler and cat back made 292rwhp.Before you start it did go to the plex on wed this week.13.1 all night with a best of 13.0 I do think thats a WA Stock GTS record. Was the Silver S2 R33.Im getting a time card to post but the speed was about 180ks.As Rev210 said Track is proof.

We also have full Shootout 4WD dyno about to be fitted.

OK i cant back the 299.1 car yet but early this week a GTS with SAFC cooler and cat back made 292rwhp.Before you start it did go to the plex on wed this week.13.1 all night with a best of 13.0 I do think thats a WA Stock GTS record. Was the Silver S2 R33.Im getting a time card to post but the speed was about 180ks.As Rev210 said Track is proof.

We also have full Shootout 4WD dyno about to be fitted.

I was there on Wednesday night and can confirm the car did run a best of 13.08 from memory. I work with the owners girlfriend and was watching the car closely. I believe it still has a stock dump pipe!

Still on 235/45/17 road tyres (not drag rubber)

The ironic thing is that the owner was disapointed that he couldn't do 12's

Wrong. Well, sort of. The inlet temp sensor has to be placed in such a way that it ACURATELY reflects the ACTUAL temp of the air entering the engine (usually before the filter).

If you are a shootout workshop and running in shootout mode you must place the sensor at the air filter. Top Racing are shootout workshop!

All this talk of different Dyno's, and prove it on the track etc, really amuses me.

The thread title is........... 319wrhp Standard Turbo! (maybe).

You cannot prove any of this without dismantling the turbo. FULL STOP.

And any of you other guys with "freaks" should think about this.

I know my Turbo was "hi-flowed", as I had it done when I killed it (as stock) with too much boost.

I wonder how much anyone else knows how stock their turbo is ?

Will continue to watch this space with amusement.

El Bee

what was too much boost?????

The guage I had then showed 17 lbs a coupla times before it went.

I had built an Electronic Boost Controller was dialling it in with a gut full of piss and my Son at the wheel.

It may have been a combination of me fiddling with the load points and a lack of consistency in the runs.

Anyway, that turbo was certainly not a freak. It got 184 rwkw on a dyno day (maybe a bit friendly even).

El Bee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...