R33 GTS-T Rear Speakers?

[Gianni]

Hello all,

Can anyone tell me out there what size exactly are the original size of the rear speakers in an R33 coz I'm looking at replacing the original's with an exact fitment from the pioneer range if possible!

Regards,

Gianni

[predator]

Front is standard 6 1/2" but will take 6" .. rears are 6".. make sure they're fairly low profile so as to not come down too much onto the HICAS module in the boot, etc.

edit: i could be wrong on the rears, might need to check. Maybe they're same as the fronts and will take either

anyway, here is all the old stuff with info on how to take out parcel shelves, etc:

http://www.skylinesaustralia.com/forums/archive/

[Gianni]

Thank's Predator,

Would you know of hand if there are any Pioneer speakers for the rear that I could use without modifying anything? meaning keeping the original set up?

Thanks,

Gianni

[pushead]

if you planning to get 6 1/2 then you don't have to modify anything eg: cuting boot etc.. as they should fit in perfectly.

[DJ_L3ThAL]

i used MDF to space the 6x9s upwards, and carpetted, looks sick

[riggaP]

6.5 inch in the rears. I spent an hour making wooden spacers for them... pushead is 100% correct

[Frosty]

if you dont want to do anything major then just mount 6 1/2 inched in the old slots and use the factor grills that are on the parcel shelf to cover them. otherwise you could do what i did an put pioneer 6x9s and custom made a parcel shelf for the back dash

[BATMBL]

hey guys,

my question is, i want to put new pioneer 6" speakers in the rear and in the doors(i want to replace all the stock speakers). will these fit?

cheers

[Frosty]

yeah 6 inch will go straight in

no need to modify anything at all

i got 6 1/2 in pioneer 3 ways in the doors of mr r32

[Jimbo2000]

so 6x9s will fit ok?, i've got some pioneer ones from my old car and would like to put them in. (33gtst)

[rs73]

would low profile speakers means they will have inferior bass response? Since the better ones usually have larger magnets and thus may intrude to the hicas system behind it.

[KamikazeR33]

mine sit nicely

they a carrozerria ones that r 2 3' speakers and 2 tweeters in the 1 unit

aparently they light up at the back too but i cant figure out how to conenct them up without maybe blowing them up

[Guest wontok]

Somethin to consider, I put all my cash into the front stage and got rid of the rears all together. Sounds awesome, but it's all up to personal taste.

[MotoX]

yeah

i got a pair of mb quart splits, cost a mint but i got them on special. their awesome, but they were too big for the stock holes to i had to custom make them into the doors. also made a hold in the doors for the tweeter. looks like it came like that from the factory, im quite happy with them.

they are loud as hell but i didnt buy them for bass, ive got 2 12" kicker comps in my garage, jsut need a box and amp.

im only running front speakers atm just like u wontok.

going to get some 3ways for the rear, and run them jsut of the headunit.

may i sugest taking in the black speaker holder thats behind the door and test fitting your speakers or else u will spend 4hrs+ making custom door mounts ect.

[Chris Rogers]

fronts are a 6.5"

rears are a 6.5"

philips 3 ways are a bolt in idea as are the larger pioneer items. the 6" ones require a steel/ wooden plate to fit properly.

clarion 6" will also fit and come with teh adapting plate for nissan cars ( the originals are clarion.)

[hippy]

so which 6" would u guys recommend .. for front stage and then maybe the back ... i'm looking for some mb quart for my front ... at the back i dont know ... i dont' want to leave it empty .. i want something cheap but not too sh1t ...

[Chris Rogers]

quart will work fine in the front.

rears depends on you . I left the stock ones in quite a few.

[hippy]

how much should i be expecting to pay for quart .. premium 6.5, ref 6.5, and discus 6.5 ?

[Chris Rogers]

dunno - I don't deal with them

[Wild33]

hey guys, its 11:30pm, and i am trying to take out the darn 6 inches from the rear parcel shelf, but there is a nuisance 'baby anchor plate' across my 6's, because i going to replace with explods 6X9's, but the question is HOW DO I TAKE OFF THE TOP (BROWN WOODEN + CARPET TOP LAYER PARCLE SHELF) OFF???, so i can get to the bolts which removes the baby anchors?