Jump to content
SAU Community

Recommended Posts

Hi,

This is my first post on this forum. My other half spends his time on Nissansilvia forums. Perhaps I should start my own username......

We had previously done a little research on where we should get our car re-trimmed. We have just finished improving most of the exterior of the car and are just waiting for the rims to arrive. Its been 10 weeks now but it should be getting here anytime soon. According to my worse half, Charles from JDM is reliable and honest.

Anyway, the parts we were looking to re-trim are front and rear seats, the dash, the pillars and the roof, the centre console. Might do the carpets as well. Can someone please offer recomendations as to where a good, reliable and not over priced place to get this done. The budget we have is set to a upper limit of $5,000. Only the seats are to be re-trimmed in leather, but everything else is vinyl.

The colour I was a combination of red and black. red door trims, glove box, gear boot and brake cover. The seats will be red in the centre and black on the outside of the seats. Oh, by the way, the car is a Nissan 180sx. What do you think of this combination? I will appreciate all constructive comments.

Thanks,

Mie

Link to comment
https://www.sau.com.au/forums/topic/111885-interior-re-trimmers/
Share on other sites

ok there is a place in Richmond that is highly recomended. seen some really good jobs in my FTO club...door trims, seats dashes etc. can't rem. the name...like Melbounre Dash or richmond dash or something...take ur car down and they tell u the deal...costs were good also. sorry can't remember the name.

what area are you in ? there is a momo/recaro stockist, that fully retrim seats in leather, and everything, use a1 retrimmers and quality is good, seen a little bit of their work. They are on cheltnmen road moorabbin, near southland.

there is also another place in moorabbin called blackmans, although i havent seen any of there work, they have a godamn big workshop. And im sure they would have a webaddress on the internet. Plus if your looking for a perfect showcar standards, you will most likely pay more than what your budgeting for, as in leather i think its about 1.5 per front seat and 2 for the rear, but these are just rough prices i have gotten before, never an actual quote.

So ring up, go look at their workshop, ask to enter and have a look at some of the work being done.

Good luck...

*awaits comments about ns.com to start*

hmmmm, thank you for all your responses.

I am located in Box Hill South. I will have to travel quite a bit to get to those places.

I think I have heard of Blackmans. They do the leather re-trims for Mazda at Moorabin. The sales people at Mazda said that they were quite good and it cost $2,500 to re-trim all the seats in leather.

Coupe-This, thank you for the advice. I think I will have to increase the budget........ Will $5,000 get me a middle range quality job for the re-trimming the entire interior? I better talk this over with him. We did not think it would cost that much.

Mie

As for the seats I just saw my mates FTO with new front/back seats and door trims in read leather from the place in Richmond...was damn sweet. was real/high quality leather not crapo letherette for 500. I think it cost him about 1500 all up.

Unique Auto Interiors

140 Cromwell St

Collingwood

VIC, 3066

Australia

&

This place has seom stuff for R33s and I have head good things about the re-trims for the dash

Croydon

http://www.dashboardcentre.com.au/

Top notch work here - but don't expect it to be cheap:

http://www.garryblackmantrimming.com/

A friend's cousin runs a trimmer in Thomastown (getting details for you). They regularly show up at Autosalon etc and were the ones who did that Valiant Regal for the radio station a while back. Good quality.

what area are you in ? there is a momo/recaro stockist, that fully retrim seats in leather, and everything, use a1 retrimmers and quality is good, seen a little bit of their work. They are on cheltnmen road moorabbin, near southland.

there is also another place in moorabbin called blackmans, although i havent seen any of there work, they have a godamn big workshop. And im sure they would have a webaddress on the internet. Plus if your looking for a perfect showcar standards, you will most likely pay more than what your budgeting for, as in leather i think its about 1.5 per front seat and 2 for the rear, but these are just rough prices i have gotten before, never an actual quote.

So ring up, go look at their workshop, ask to enter and have a look at some of the work being done.

Good luck...

*awaits comments about ns.com to start*

the momo/recaro ones on chesterville road... (if its the same one im thinking of... its been there for years now before the Waves pool heading from south road to southland or have they moved?).

Blackmans are 5 star quality... not only mazda but BMW and Mercedes all trim their cars there... not to mention almost every car manufacturer in the area. They retrimmed my uncles mates hot rod... awesome job and the leather is so soft and comfy.

Yep two thumbs up for garry blackman in richmond....retrimmed my steering wheel, gearstick and handbrake boots in alcantra.

Top work!

Hi ant, how much did it cost you all up for the retrim?

Jon

skyline gtr seats are fairly nice and give it u bit of an upgrade at a fraction of the cost. im pretty sure they dont have skyline written on them

I have got S15 seats in a 180sx. They are a good improvement to the stock ones with alot more back support and look much better for a retrim.

Top notch work here - but don't expect it to be cheap:

http://www.garryblackmantrimming.com/

A friend's cousin runs a trimmer in Thomastown (getting details for you). They regularly show up at Autosalon etc and were the ones who did that Valiant Regal for the radio station a while back. Good quality.

Thanks for the link. I have heard good things about them and yah, the work they do is not cheap, but you get what you pay for.

Jon

car trims in burwood. they did a good yet simple job for me. they always have top quality cars in the workshop having work done.

Burwood is near where I live, might give drive over to have a look at some of their work. Thanks mate.

khunjeng, $1,500 for the work done is cheap, definately worth investigating. Thanks.

Jon

Well all up including the gearstick/handbrake boots as well as the steering whell it was around 400-500 mark. Bare in mind that I had it done in alcantra which is one of the most expensive materials.....normal leather would be a lot cheaper I'd imagine.

All I can say is that it was a fantastic job...they did it in 1/2 a day and the blue stitching looks great. Not the cheapest, but as someone said you do get what you pay for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...