Jump to content
SAU Community

Can My Skipping Head Unit Be Fixed?


grepin
 Share

Recommended Posts

Run a lens cleaner cd through it. If that doesnt help then your laser might be dying. Atleast thats what it was for my old headunit. The guy said the a replacement laser was going to cost more than the head unit was worth.

Link to comment
Share on other sites

Hi grepin,

Kenwwod units have the tendancy to skip, mainly due to them using sanyo lasers and mechanism's.

This has been the design kenwood have run with for the past 8 years.

I to have experienced problems with Kenwood units and will now NEVER own or recommend them to anyone.

To get the unit fixed is relatively simple, send it to kenwood in sydney with a copy of your purchase receipt ( within 12 months for warranty ) and they will within 6-8 weeks have it back to you. However they may not fix it.

If it is out of the warranty then dont bother getting it fixed, parts are expensive.

My experience.

The last unit i sent to kenwood was the last one i owned, it went back and forth 4 times, which was pretty bad, i was a dealer for them at the time. The forth time it went back in PEICES with a letter addressed to the then national service manager and a video tape.

The tape was of the kenwood unit on a concrete floor being smashed with a hammer. And of a SONY unit going into my car.

They sent me a new one which i gave away when i received it.

Cheers

frx026

Link to comment
Share on other sites

I had a kenwood head unit once and it was also a skiper. Then i got an eclipes mp3 player and i tell you that some of my worst keeped cds played like new. all eclipes cd players have good glass lasers i recommend you give the kenwood the toss (or give it away). I now have a poiener dvd player in my new car worth 5 times the value of the eclipes in the old car but it still does not read as good.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yep, I was supprised. Its all about flow rather then housing size.  Doing G35-900 Vs ATR45SS-1 Next. 62mm V 61mm. 
    • Of course sometimes you cannot go with the cheaper alternative but I try to weigh it up for the application - am I competing or am I going to the track ten times p/yr. As long as there’s enough information out there to back the cheaper alternative as a good option I’ll go for that.   I’m a bit of a bastard though as it’s my job to reduce costs, particularly on non income generating assets. EUR 500 saved for the diff + EUR 1,000 saved on BC racing over Bilstein and then say EUR 300 versus EUR 600 on an off brand windscreen versus OEM (for example) soon accumulates. I mean, I’m probably gonna put the car in the ditch anyway. Absolutely do not take this as a justification for always buying cheap shitty parts, just a rationale for doing your research and considering what’s necessary for your application.    
    • All the above effort, time, swapping out parts in the dark (i.e. no O2 data). You're literally running in the dark.
    • Looks like both of my cars have pressure switch issues. The R32 GTR has 18 flashes on the ATTESSA controller which is "ETS pressure switch circuit". The 4WD light is intermittent, and often just restarting the car clears it. There is an $300 replacement option https://www.ebay.com.au/itm/285675135148?itmmeta=01HXN3YKRGKQ08GRZ5KFKKZWJT&hash=item428390a0ac:g:6CcAAOSwWxBltMEG so if it becomes a permanent issue and I can confirm that the switch is the issue, i have a solution. The NM35 is reporting C1208, and disconnecting the switch causes the 4WD light to go away. Translating from the Japanese shop manual "when the pressure is reduced to 2.6MPa (377 psi) or less: conduction occurs when the pressure increases to 3.8MPa (550 psi) or less: conduction is present. Reference: • Immediately after the E-TS actuator motor stops, the pressure inside the accumulator is high and there is no continuity." Not sure how good the translation is but from what i can deduce this means the switch is normally closed (NC) and as the pressure builds from 0 to 550 psi the switch stays closed, then opens and 550 psi. As the pressure drops from 550 psi to 377 psi the switch stays open then closes again at 377 psi. Is that how these things work? These pressures are a lot higher than the R32 ("control pressure 0-228 psi") but i'm hoping i can find a generic switch (like they've done for the R32) to use as a replacement. Maybe something like https://www.ebay.com.au/itm/355586397452?epid=1676016964&itmmeta=01HXN534AF22ACTG6TGDDQGEQ7&hash=item52ca99d50c:g:mAEAAOSw8ilmBcMh&itmprp=enc%3AAQAJAAAA8LtWdNlWHgyJ%2F3cbw25S2A1lde3qBi3fJii4T3lQavCz4kpqiD42SmBa4FocMvXCjcxiowHjb8vZ8%2BWxc53BkHv781tkStSnCDaenfGKC3bIp0keK20dfsn9LoPa3TfqaEmAydqqyKobgTdXsGGzsl%2BRjOVGuD8OIpOv%2B0wMl7aUtHg0iJtojbtzA%2BRS8Xfm8Ufjuvz4niwrqglAXFUbkL6J%2FGuHPeeECZhLBBN3iNM1Swl94Fv5zE95YK%2B5O6dxDN1ySNOjdMxkA8yaprbuwRHFQv1nlGh%2FWjekj6EUFR2%2FO4HTsoKtSAkY0Mj1w1uf1w%3D%3D|tkp%3ABk9SR6zFjKXtYw but with a lower close pressure, and thread adapter if required. Am i dreaming?
×
×
  • Create New...