Jump to content
SAU Community

Recommended Posts

Hi guys i thought i would let every one know that we raced at the Australian Tin Top Titles on the weekend and lowered the bar yet again. With a big thanks to all my sponsers and Mark from Godzilla motorsport for the borrowed parts.

60 1.517

330 4.056

660 6.119

mph 120.00

kph 193.12

1000 7.878

et 9.359

mph 153.01

kph 246.24

A BIG THANKS to all my sponser and my crew

Theo

Edited by theo
Link to comment
https://www.sau.com.au/forums/topic/112984-theos-gtr-runs-935/
Share on other sites

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Good work Theo, must be a big relief for you guys to achieve a time you know the the car's capable of! Was there anything specifically you did to drop the time?

Looking at the times, if you can get the 60ft down to what some of the other guys in the 9's have, you'll be getting awfully close to a 9.0!

Congrats!

How many runs did ya do?....did you run more timing?.....who won in what car?....what other times did ya run...etc??

Oh yeah and congrats as per ph call on Saturday.

Edited by DiRTgarage

well done theo on your great time .

great effort on resetting the bar..

i think its time to turn the wick up on the black beast....ha ha ha

just been to busy with my new workshop at present to play cars...

cheers mark

ps. those new spark plugs i gave you are the go.....................

awesome work

I did a quick search and can't seem to find the model federal tyre you use as I need new drag tyres with times like this from them damn they must have some grip

i have brand new MTs in the shed, might have to sell them off and go to the federals, they been doing some development work on their tyres or am i missing something here. no bastard seems to sell them in the newcastle area.

good work on the ET theo,

i better go prod carlos to get his rear in to gear. would be good to see low nine sec pases toyota versus nissan.

Can you tell us what tyres you used Theo??

BTW car looks great and an awesome effort on the time :blink:

Tread pattern looks like Mickey Thompson Street Drag Radials....looks like Theo has finally opted for some decent rubber.

Tread pattern looks like Mickey Thompson Street Drag Radials....looks like Theo has finally opted for some decent rubber.

From the man himself and courtesy of Fullboost

Theo Woollett Racing Nissan GT-R Runs Personal Best Pass at Tin Tops

April 10th, 2006

By Ben Wooster

At the Australian Tin Top Titles held at Willowbank Raceway last weekend, Theo Woollett Racing have reached their goal of completing a sub 9.5 second time in their street registered and street tyred R32 Nissan Skyline GTR, with an elapsed time of 9.359 seconds at a terminal speed of 153.01mph (246klm/h) achieved over the ¼ mile track.

Highlighting improved traction as a major contributor to the improved performance, team owner and driver, Theo Woollett added, “We’ve been making the power for quite awhile, now we’re tuning the car to get it to the ground effectively”, stating that gains have been made in suspension setup and power delivery characteristics to achieve the weekend’s improvement of nearly 0.5 seconds of their previous best time.

TWR’s Skyline GTR is still very close to it’s original factory specification, with a totally factory standard body shell with glass, standard suspension pick-up points, and still sports such niceties as power windows and full trim. Therefore, the vehicle still weighs in at a substantial 3420lbs (1554kg), making it quite a feat to get this heavy car down the road using what is still a very small capacity 2.6 litre six cylinder engine, albeit in heavily modified form.

With around 1000 turbocharged horsepower emanating from the engine, Theo says the engine thrives on huge RPM and turbo boost , stating that he’s used well over 10,000rpm and 40psi during previous runs, but on the weekend’s 9.35-second run the engine didn’t rev over 9,800rpm or see more than 32psi of boost pressure. “Once we are confident with our current suspension set-up, we will once again increase the RPM and boost limits in an attempt to crack the 8-second barrier”, said Theo when interviewed after his record run, adding “We still have a couple of tenths to shave off the 60ft time, and I’m confident once we do this, we will be in the time bracket we know the car is capable of “.

With Theo and his team now seemingly coming to grips with this high-tech drag racing package, the months ahead will prove interesting as they takes the fight up to the traditional V8 racers, and their fellow Nissan campaigners around the country. Stay tuned!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...