Jump to content
SAU Community

Recommended Posts

Hey guys,

I am getting a brand new stainless steel 3" turbo back system with high flowed cat installed on my r32 tommorow. At the moment i have a very cheap 3" cat back that came with the car when i bought it. It drones terribly and at 80km/h i can barely hold a conversation in my car without yelling which is the main reason for the upgrade.

But what i was wondering, was will the new exhaust with dump pipe and high flowed cat give much better performance than the current system i have?

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/113354-r32-gts-t-3-turbo-back-system-power/
Share on other sites

Well turns out I wont be gettin system today because of delays, but the guy gettin it in for me confused me. I asked him if it was definately turbo back and he said no, but it has a dump pipe?? My understanding was that a dump pipe is a pipe from the turbo back to the cat, meaning if you have a dump pipe you have a turbo back system??

Is that correct?

not quite...

turbo bolts onto dump pipe then to front pipe, then to cat, then cat-back

an aftermarket 3" cat back won't give any power increase over another 3" cat-back

the difference will come from fitting a dump/front pipe and the high-flow cat...

good luck,

Warren

I should've clairifed.

Turbo back system consists of (in order of fitment)

Dump-pipe:

tomeidump.JPG

Front pipe:

frontpipe.JPG

Hi flow cat:

cat.jpg

then

Catback + mufflers

You can also get front+dump pipe all in one pipe.

Thanks heaps for the help guys.

I'll have to wait and see if i have got a dump/front pipe all in one, but im thinking it will be, cause i looked on the website for the company that make them and it says 'Full turbo system'. Heres hoping anyway, im thinkin the entire system should resemble something like this...

xfsr33zorst.gif

Cheers

i fitted a front pipe and dump to my r33. it already had a cat back, made a huge difference to the overall power of the vehicle, u will certainly notice it, as well as the increased volume of the turbo sp00ling too :P

i fitted a front pipe and dump to my r33. it already had a cat back, made a huge difference to the overall power of the vehicle, u will certainly notice it, as well as the increased volume of the turbo sp00ling too ;)

Gota love the sound of a turbo spooling, after i had my dump and front pipe put into my cat back system that was on the car from Jap it goes harder up in the revs and sounds sweet.

Cheers

hey,

Is it true that to modify the exhaust on the R33, changing the stock dump pipe is not necessary? I heard its quite good stock, so unless u got an aftermarket turbo a front pipe back exhaust will be just as good as turbo back.

Can anyone back this up?

Is it worth getting the dump pipe as well?

Cheers

Get a compleate system, if you have seen the stock dump its a peice of shit, thats why there is reasonable gains to be had.

So get any 3inch split dump?

What do u think of the cheap E-bay ones? Anything wrong with them?

cheers

r32line what kind of turbo back exhaust did you purchase?

and what do you all think is a better option for i: batmbl split dump front brand new + cat + second hand catback OR a full xforce system for $700?

r32mildexhsystem.jpg

From what i've heard SOME of the ebay dump pipes are okay, they're still a large improvement over stock.

Not sure about the HKS split dump pipe copies on ebay though, apparently BATMBL's longer wastegate chamber is better suited for reducing turbulence as it re-connects further down the pipe.

Anyone care to elaborate here?

Edited by MintR33
and what do you all think is a better option for i: batmbl split dump front brand new + cat + second hand catback OR a full xforce system for $700?

I have always maintained the former. I would always go with that if I needed to upgrade a stock exhaust system.

I trust batmbl's pipes because they look like a good design, lots of people have made power on them and he's a good guy to deal with.

The second hand cat back you can inspect and make sure has no kinks etc and you can wash it out. For a metal pipe as long as it flows as good as it came out of the factory it's going to do it's job - it doesn't matter if some crazy Nihonjin has used it already :bomb_ie:

i have a front pipe from just jap, no cat back just the pipe so all u here is turbo spool lol, im waiting on my cat back rein hard thats on teh way,

my pipe was all one peice from turbo to the cat,

my front pipe lets me drive at alot lower revs and less "boggin down" around the streets, u can feel teh restriction when the flow starts moving more, should all change soo enough

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Saw this video today from Adam LZ.    Long story short is he is claiming that the load from the engine fan once the fan clutch heats up(engaged) is increasing the getrag rattle(at idle) when you don't have a dual mass flywheel.  Before I go buying an electric fan setup .... Anyone heard of this ?    I must admit when my car is cold the getrag is pretty quiet and I do notice the rattle after it is all warmed up. I've always assumed this is due to the gearbox oil temp and tolerances of metal.       
    • Yep it sure does.   Tone wheel lines up in the same spot perfectly.    
    • Something I meant to say when we were chatting the other night about having an open trailer floor being great to work on a car, but you've never used the feature... It's a great place to park a car after doing suspension component changes, and do the tightening of all the bushes with the car sitting at full ride height. Especially when you don't have a 4 post hoist!
    • That is way more science than even I would use. I just eyeball it, not even accounting for the non-verticality of the tape measure when held on the lip and the centre at the same time. +/- 2mm is good enough for the girls I go out with.
    • So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
×
×
  • Create New...