Jump to content
SAU Community

Recommended Posts

CruiseLiner: Go the the Hi-Octance sump I was a bit worried about it until I dropped in and had a good look at it, you get:

Enlarged Sump

Tomei Baffle Kit

Windage tray

Pefect Welding

No clearance issues

If you add it up the Tomei sump will cost you similar money once it is all said and done.

Steve Maitland from Maitland performance fabricators is the man for your job as his done many and his local and his work is proven in Wa rally and race cars.

hey steve thats who made the current one i got and its great welding, and qaulity, just a bad design with only one side enlarged and trap doored plus the pickup has the cup thing around it too.

ill post a pic up tommorow when i get 5 min

I'm using a Performance Metalcraft sump 9L. It was recommended by SK and is enlarged on both left, right and front with no clearance issues. I also have the tomei restrictor in the head, a -10 return line from the back of the head to the sump. I am also using the Nismo Oil Pump but previously I was using the JUN oil pump. Both pumps are good.

The sump setup is shown on there website at:

http://www.performancemetalcraft.com.au

Dry sumps sounds like a great thing to do but most GTR's that race here only really use a tomei baffle kit, Jap brand oil pump, restrictor in the head and an extra 1 litre of oil all on a standard sump and no oil issues at all.

How about fitting an oil accumulator such as an acusump ?

That would offer some additional protection, without any disadvantages at a fraction of the cost of a full dry sump system. It will also keep oil pressure up to the turbos for a short time after the ignition is turned off.

I have never used one, but it may be worth thinking about.

anyone know some good designs? ive seen the hi octane ones, any other brands worth looking at? i dont want the trust one as its wayyyy too low for my liking.

thanks again everyone, awesome info :)

Brad

who said the trust one is 2 low heres a pic see the diff and the bottom of the sump arnt that far apart.

post-1964-1145232807.jpg

I tested my dry sump set up on a rb20 recently. Luckily the engine was free cuase its no longer with us, the drive setup was incorrect and it ran out of oil pressure, haha these things happen thats why they needed to be tested.

Dry sump on RB= experience!!!

To do the job you not only need the backing of good machinist for parts but dry sump experts, plus an rb expert. Its all anout knowledge to get the best results. If I were you I would talk to as many people as possible that have experience with dry sumps on chevs etc, then talk to people that know about the rb series oil system, then talk to people who have actually done it and ask there opinions!!! I would only recommend it for hardcore racing cars that dont see the street, but thats personal opinion!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...