Jump to content
SAU Community

Recommended Posts

OUCH!

and oi Chris.. You might provide the cable ties, but remember I'm the one that does the tieing! :(

oh, and I'm with thomas RB26!

This is a VERY complex discussion that can go on for ages, and will surely piss the rest of the whores off if we discuss it in this thread, but in a nutshell, all things being equal, a normal stroke RB26 is better for big power on street fuel than using an RB30 crank for the following reasons-

*The piston speed is lower at the same revs

*There is less side thrust exerted on the bores by the pistons, due to less conrod angular/side motion (less heat/friction)

*The Piston spends more time in the dwell state at TDC and BDC

*The Bore/Stroke ratio is much better (over-square engines like to rev harder)

Which helps, briefly, with the following

*Keeps frictional losses down (engine lasts longer, makes power more easily)

*Helps secondary balance

*Optimises manifold air speed at high revs

And blahdy, blahdy, blah. [/end rant]

Nissan could have made the engine 3L if they wanted to, but they didn't.

P.s 2JZ's and RB30's both have around 6800rpm limits from the factory, which is the same piston speed as an RB26 at 8000rpm.

  • Replies 240
  • Created
  • Last Reply

Top Posters In This Topic

Ouch... how much damage to the head (esp the combustion chamber on 6)?

Pretty respectable effort, haven't seen something that smashed for a long time!

Edit - that quote from R32R at the top of the page is wrong, very very wrong. I think he's got things crossed up.

Ouch... how much damage to the head (esp the combustion chamber on 6)?

Pretty respectable effort, haven't seen something that smashed for a long time!

Edit - that quote from R32R at the top of the page is wrong, very very wrong. I think he's got things crossed up.

That's what I thought too but I'm glad somebody more knowledgable than me said it first.

But but but, if RB30 bottom ends are so good, then why can't I get a crate engine with an RB30 bottom end shipped from Japan? (innocent look)

No one will do it for me! They all say something along the lines of, "Are you stupid?" (innocent look)

(...stupid for asking them to build it, not stupid for asking them to build one and send it)

Seriously though, I'd like to hear someone that is all for RB30's tell me why they're better. I have no idea.

..uhm..so as not to hijack mona's thread, this is for your benefit too moonie :huh::(

i've heard RB20DE
It will be sweet when it has the CA18DE in there, should be an animal,ooops I've said too much.........

Personally, I'd be going for an L16 and turbo, blowing through a decent sized carbie of some sort - 45mm Weber, Dellorto or SU, side-draught of course... :huh:

im sure u can cable tie it back together.. no biggy
Bit of gaffa tape and she'll be all good again..

Ahhh, cable ties and gaffa/electrical tape - the drift/drag/circuit racer's and mechanic's best friend! :(

Seriously though, that is some heavy duty damage. :rofl: Mona, you should keep the parts and display them somehow for memories. Ahhh, the good times!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...