Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...
I propose a cruise up to Clackline, and then some serious paintballing! 21st April yo!

I second this..

is the paintball near clackline the one with the old plane shell and the big fortress?? if it is thats the best one i've been to.

maybe even co-ordinate a SAU v WRX or Silvia forum battle for supremacy :P

edit: doh, didnt know there was already a thread on this bubba....heh

  • 3 weeks later...

Just throwing stuff out there what if you planned a day cruise and it went to a country town like gingin or mandurah or some where like that have a bbq then crusie back or some thing along those lines i just like big roads to cruise on. :P

Hi team, just a thought, new member and all, but can the members running the cruise on the day wear something distinctive, so many people last friday ah?. maybe a club shirt or even a fluo vest?. . .you can tell i,m an old fart ah.

  • 3 weeks later...
Just throwing stuff out there what if you planned a day cruise and it went to a country town like gingin or mandurah or some where like that have a bbq then crusie back or some thing along those lines i just like big roads to cruise on. :P

Hey Shenron, since when has Mandurah been a country town? :O

I'd prefer a long cruise to a destination like gingin or guilderton (nice cruise, great place to swim)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...